Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Canon 4300ex
0 views
Skip to first unread message
Edson Inniss
Jan 25, 1999, 3:00:00 AM1/25/99
to
I purchased a Canon BJC-4300ex on Jan 24th 1999 and I am not able to get it
to work.
The self test works. , but I am unable to print a test page.
It prints a page with "^e^e" at the top and then the message "Cannot
detect cartridge type"
I have installed the printer driver many times with no change .
to work.
The self test works. , but I am unable to print a test page.
It prints a page with "^e^e" at the top and then the message "Cannot
detect cartridge type"
I have installed the printer driver many times with no change .
Any ideas as to what may be causing this ??
Edson
Russ Wright
Jan 25, 1999, 3:00:00 AM1/25/99
to
Edson Inniss wrote in message ...
Look for a file named DRVWPPQT.VXD which should be located in the
Windows\SYSTEM\IOSUBSYS directory. If it is there AND you don't have a
parallel port tape driver, rename the file to DRVWPPQT.OLD.
Insure the print cable is good
And install Canon's v3.95 drivers
Russ Wright
http://www.magma.ca/~russrite/Canon_Drivers/
Edson Inniss
Jan 26, 1999, 3:00:00 AM1/26/99
to
This file " DRVWPPQT.VXD " is not on my hard drive anywhere. Is there
something else wrong ??
something else wrong ??
Ed
Russ Wright wrote in message ...
Greg Cisko
Jan 26, 1999, 3:00:00 AM1/26/99
to
I Had this problem with a brand new BJC4400. the problem is that my
parallel port cable was not plugged into my MB correctly.
parallel port cable was not plugged into my MB correctly.
I had a bent pin.
--
Header address intentionally scrambled to ward off the spamming hordes.
cisko [AT] ix [DOT] netcom [DOT] com
0 new messages