vxworks 6.8 Image loading error: Error opening dt3240lab1:vxWorks.sym: status = 0x41

[scorpion4you]

Hi,

I am working on vxworks 6.8. I have created an Image project based on my customized BSP. When i tried to load the vxWorks image to the target it loaded properly to one target But the same image did not loaded properly to other target. i got the following error while loading the image to target:

Waiting for DHCP, CTRL-X to abort.
.Loading... 2372240
Starting at 0x10000...

Failed.
Error opening dt3240lab1:vxWorks.sym: status = 0x41




Following is the console output for the same.
[VxWorks Boot]: @

boot device : qefcc
unit number : 0
processor number : 0
host name : dt3240lab1
file name : vxWorks
inet on ethernet (e) : 192.168.130.185
inet on backplane (b): 192.168.130.185
host inet (h) : 192.168.12.52
gateway inet (g) : 192.168.130.1
user (u) : vxworks
ftp password (pw) : vxworks
flags (f) : 0x40
target name (tn) : mds8360

Waiting for DHCP, CTRL-X to abort.
.Loading... 2372240
Starting at 0x10000...

Failed.
Error opening dt3240lab1:vxWorks.sym: status = 0x41


]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks 6.8
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.13
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2009

CPU: Freescale MPC8360E MDS. Processor #0.
Memory Size: 0xfeef000. BSP version 2.0/3.
Created: Aug 7 2012, 08:43:24
ED&R Policy Mode: Deployed
WDB Comm Type: WDB_COMM_END
WDB: Ready.

My vxWorks.sym file is not loaded so i was not able to use the symbols. Can anyone suggest me where may be the problem?

Thanks in Advance.


--http://compgroups.net/comp.os.vxworks/

[ebea...@gmail.com]

On Tuesday, August 7, 2012 12:57:04 PM UTC-4, scorpion wrote:
> Hi,
>
>
>
> I am working on vxworks 6.8. I have created an Image project based on my customized BSP. When i tried to load the vxWorks image to the target it loaded properly to one target But the same image did not loaded properly to other target. i got the following error while loading the image to target:
>
>
>
> Waiting for DHCP, CTRL-X to abort.
>
> .Loading... 2372240
>
> Starting at 0x10000...
>
>
>
> Failed.
>
> Error opening dt3240lab1:vxWorks.sym: status = 0x41
>

[banner etc. deleted]

>
>
>
> My vxWorks.sym file is not loaded so i was not able to use the symbols. Can anyone suggest me where may be the problem?
>
>
>
> Thanks in Advance.
>
>
>
>
>
> --http://compgroups.net/comp.os.vxworks/

This may be useful to anyone who finds this thread while searching like I did (I suspect that scorpion has solved it by now).

My board runs u-Boot rather than the VxWorks System Boot loader, and u-Boot expects the vxWorks file to have the symbols in it already.

To set this up, you need to turn on the built-in symbol table with INCLUDE_STANDALONE_SYM_TBL. Workbench has at least 2 ways to do this under Kernel Configuration: your BSP should have a bundle for "standalone kernel shell"; or you can just look under Components for symbol table components and drill down to select built-in instead of downloaded.

HTH!

-- Bob

[ankurpr...@gmail.com]

On Tuesday, 7 August 2012 22:27:04 UTC+5:30, Learner wrote:
> Hi, I am working on vxworks 6.8. I have created an Image project based on my customized BSP. When i tried to load the vxWorks image to the target it loaded properly to one target But the same image did not loaded properly to other target. i got the following error while loading the image to target: Waiting for DHCP, CTRL-X to abort. .Loading... 2372240 Starting at 0x10000... Failed. Error opening dt3240lab1:vxWorks.sym: status = 0x41 Following is the console output for the same. [VxWorks Boot]: @ boot device : qefcc unit number : 0 processor number : 0 host name : dt3240lab1 file name : vxWorks inet on ethernet (e) : 192.168.130.185 inet on backplane (b): 192.168.130.185 host inet (h) : 192.168.12.52 gateway inet (g) : 192.168.130.1 user (u) : vxworks ftp password (pw) : vxworks flags (f) : 0x40 target name (tn) : mds8360 Waiting for DHCP, CTRL-X to abort. .Loading... 2372240 Starting at 0x10000... Failed. Error opening dt3240lab1:vxWorks.sym: status = 0x41 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R) ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]] ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]] ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]] ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]] ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]] ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]] ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]] ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System ]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks 6.8 ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.13 ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2009 CPU: Freescale MPC8360E MDS. Processor #0. Memory Size: 0xfeef000. BSP version 2.0/3. Created: Aug 7 2012, 08:43:24 ED&R Policy Mode: Deployed WDB Comm Type: WDB_COMM_END WDB: Ready. My vxWorks.sym file is not loaded so i was not able to use the symbols. Can anyone suggest me where may be the problem? Thanks in Advance. --http://compgroups.net/comp.os.vxworks/

Hi,
Thanks for the post. It helped me solve my problem.