Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Displaying EWx0: to WEn: connection.
38 views
Skip to first unread message
Jan-Erik Soderholm
May 14, 2013, 2:07:13 PM5/14/13
to
Hi.
I have two Ether cards EWA0: and EWB0: (as seen
from the console or from MC LANCP).
TCPIP SHO INTER shows two devices WE0: and WE1:.
Is there a single command that clearly shows which
EWx0: device is which WEn:, so to speek ?
Preferable without shutting down VMS...
Regards,
Jan-Erik.
I have two Ether cards EWA0: and EWB0: (as seen
from the console or from MC LANCP).
TCPIP SHO INTER shows two devices WE0: and WE1:.
Is there a single command that clearly shows which
EWx0: device is which WEn:, so to speek ?
Preferable without shutting down VMS...
Regards,
Jan-Erik.
Stephen Hoffman
May 14, 2013, 2:46:24 PM5/14/13
to
On 2013-05-14 18:07:13 +0000, Jan-Erik Soderholm said:
> Is there a single command that clearly shows which EWx0: device is
> which WEn:, so to speek ?
A simple way view the interface to device name mapping:
> Is there a single command that clearly shows which EWx0: device is
> which WEn:, so to speek ?
@SYS$STARTUP:TCPIP$CONFIG core environments interfaces
--
Pure Personal Opinion | HoffmanLabs LLC
Steven Schweda
May 14, 2013, 2:48:29 PM5/14/13
to Steven M. Schweda
> Is there a single command that clearly shows [...]
So far as I know, the mapping, A -> 0, B -> 1, and so on,
is fixed, not variable, so EWA0 = WE0, EWB0 = WE1, and so on.
There may be a (TCPIP) manual which says this, but I know of
no such command.
> Preferable without shutting down VMS...
Disconnect one cable, and see what fails?
So far as I know, the mapping, A -> 0, B -> 1, and so on,
is fixed, not variable, so EWA0 = WE0, EWB0 = WE1, and so on.
There may be a (TCPIP) manual which says this, but I know of
no such command.
> Preferable without shutting down VMS...
Jan-Erik Soderholm
May 14, 2013, 5:22:24 PM5/14/13
to
Stephen Hoffman wrote 2013-05-14 20:46:
> On 2013-05-14 18:07:13 +0000, Jan-Erik Soderholm said:
>
>> Is there a single command that clearly shows which EWx0: device is which
>> WEn:, so to speek ?
>
> A simple way view the interface to device name mapping:
> @SYS$STARTUP:TCPIP$CONFIG core environments interfaces
>
>
Yes, that screen was quite clear :
> On 2013-05-14 18:07:13 +0000, Jan-Erik Soderholm said:
>
>> Is there a single command that clearly shows which EWx0: device is which
>> WEn:, so to speek ?
>
> A simple way view the interface to device name mapping:
> @SYS$STARTUP:TCPIP$CONFIG core environments interfaces
>
>
INTERFACE Configuration
The Ethernet device(s) on your system are: EWA0:
EWB0:
WE0 is the Ethernet device EWA0:
WE1 is the Ethernet device EWB0:
I think that's it. :-)
> Disconnect one cable, and see what fails?
Next question is how to identify EWA0/EWB0 from the back
panel of the server. Hopefully the cards have MAC
addresses on the outside...
Thanks,
Jan-Erik.
0 new messages