IBM PC750-P90 HELP! No Sound...
jt...@ibm.net
>Howdy:
>
> I have an IBM PC750-P90 at work (32MB ram, 540MB hd, NEC 2X,
>Diamond Viper PRO (??, its got the -9100 chip). Anyway, Warp works beautifully
>on this system except that I have no sound. IBM tech support has not been able
>to figure this one out yet either. BTW, it has I believe the business audio--
>it's built in to the motherboard. I have tried every logical driver with every
>logical setting with no luck.
>
>Any ideas?
>
I got some drivers for the crystal sound chip set from www.pcco.ibm.net
and have sound but it only emulates the microsoft sound system.
b...@tricon.net
I have an IBM PC750-P90 at work (32MB ram, 540MB hd, NEC 2X,
Diamond Viper PRO (??, its got the -9100 chip). Anyway, Warp works beautifully
on this system except that I have no sound. IBM tech support has not been able
to figure this one out yet either. BTW, it has I believe the business audio--
it's built in to the motherboard. I have tried every logical driver with every
logical setting with no luck.
Any ideas?
**************************************************
* Ben Gamble b...@tricon.net *
* Kingsport, TN bga...@eastman.com *
* KD4UMT EM86 afg...@prodigy.com *
*------------------------------------------------*
* The Microsoft Network (tm) is prohibited from distributing *
* this work in any form, in whole or in part. Copyright *
* (c) Ben Gamble, 1995. License to distribute this post is *
* available to Microsoft for $800. Appearance without *
* permission constitutes agreement to these terms. *
**************************************************
tho...@galileo.ifa.hawaii.edu
> I have an IBM PC750-P90 at work (32MB ram, 540MB hd, NEC 2X, Diamond Viper
> PRO (??, its got the -9100 chip). Anyway, Warp works beautifully on this
> system except that I have no sound. IBM tech support has not been able to
> figure this one out yet either. BTW, it has I believe the business audio--
> it's built in to the motherboard. I have tried every logical driver with
> every logical setting with no luck.
>
> Any ideas?
I've been through this one. There are proper drivers. Maybe I can arrange
to get them to you, because I don't recall the FTP address where I got them.
In fact, I recall that the tech support person I talked to had to make
arrangements to get them on the network so that I could download them.
As far as tech support is concerned, it really depends on who you get. I
got lucky; the person I talked with was first rate.
Question: did your machine come preinstalled with Warp? Was the sound
working then? The sound will not work if you install from shrink-wrapped
Warp.
Do you have an FTP site where the drivers can be sent?
Glen Cianciulli
:>
:>Howdy:
:>
:> I have an IBM PC750-P90 at work (32MB ram, 540MB hd, NEC 2X,
:>Diamond Viper PRO (??, its got the -9100 chip). Anyway, Warp works
beautifully
:>on this system except that I have no sound. IBM tech support has not been
able
:>to figure this one out yet either. BTW, it has I believe the business
audio--
:>it's built in to the motherboard. I have tried every logical driver with
every
:>logical setting with no luck.
Check if there's an Interrupt conflict. I have a PC750 6885-4CH (PCI/SCSI
P-90) and I my PCI lan card took caused my SCSI board to remap to int_10,
which is MANDATORY for business audio.
Go into the Setup Screen during RAM count (F1 I believe during RAM check).
PC-700 setup screen Setup:
ISA Legacy:
- int_10 make Not Available (reserve it for business audio)
Business Audio:
- int_10 required (thus make it unavailable for plug/play)
PCI Auto Lansteamer:
- requires to int_11
SCSI-2 PCI:
- default is int_11
change to int_? after PCI AutoLanstreamer is installed
post or email if it fails once Business Audio is set for int_10..
Glen Cianciulli
Pulse Software
gci...@i-2000.com