Panorama EDID

[baden.ku...@gmail.com]

I am trying to figure out the Panorama EDID. I just replaced my 14" T60 with another 15" T60 containing an ATI Technologies Inc - Mobility Radeon X1400 video card.

Previous T60 embedded card:

- scaled correctly to 1920x1080 on my external Samsung (LS24F350) monitor at 16 bpp

- would not work for 32bpp, as the display was corrupted

- maybe insufficient video memory or frequency

New T60 with ATI:

- Panorama sees the external display as 1920x1440

- works well at 32 bpp

- as expected, off the top and bottom

[C:\]panoutil -i
[...]
Mode[72] Id=800001d6 X=1920 Y=1080 Depth=32 PhysAdr=d8000000 Size=b00000 (11 MiB/11 MiB)
[...]
EDID Version 1.3
Display size 33 cm x 21 cm
Display Resolution is X=1680 Y=1050

(these are the T60 panel's dimensions)

[C:\]panoutil -s

Status on drive C:
Custom resolution logic is enabled.
Use Native Resolution is disabled
Manual custom resolution 1920x1080 is set.
No manual EDID is set.
PM Resolution is set to: 1920x1080 @ 16777216 colors

- The Samsung display dimension's are 52 cm x 29.5 cm

- The display converge is actually 46 cm x 29.5 cm

- Windows works perfectly

[C:\]panoutil
PanoUtil 11-Aug-2013 Written by David Azarewicz
-e 0|Clk,H,V,Hbl,Vbl,Hof,Hw,Vof,Vw [d:] : Set custom EDID on drive d:

- What are those switches and their proper formats?

- From the Samsung BN46-00552E-Eng.pdf

Resolution Horizontal Frequency kHz) Vertical Frequency Hz) Pixel lock (MMHz) Sync Polarity H/V)
VESA DMT, 1920 x 1080 67.500 60.000 148.500 +/+

- I would like to use the above switch to set a custom EDID

- What should the panoutil -e look like?

- I tried what I thought:

[C:\]panoutil -e 148.5, 1920, 1080, 32, 22, 67.5, 1, 60, 1, c:
Cannot get status on file 1:\OS2\OS2.INI
Cannot get status on file 1:\OS2\OS2.INI

Does anyone have any suggestions?

thanks,
Baden