DHCP Implementation on OS/2 v3.0

[Daniel Juarez]

Is there an MPTS fixpack that provides OS/2 WARP v 3.0 with DHCP
capabilities???

Thank you,
Dan

[Jonathan Alumbaugh]

In message <5v3paj$c...@news.or.intel.com> - DanielX...@ccm.ut.intel.com
(Daniel Juarez) writes:
:>
:>Is there an MPTS fixpack that provides OS/2 WARP v 3.0 with DHCP
:>capabilities???
:>
:>Thank you,
:>Dan

Yes, check out the following URL:

http://www.cincyteamos2.org/masterupdate_c.html

If you install the latest MPTS fixpack, it adds DHCP and (I believe) DDNS.

Jon Alumbaugh, MCSE

(alum...@chicagonet.net)

[Daniel Juarez]

Thank you. I found the DSK disks (2 of them). But, there is mention of a
third "MUST HAVE" diskette called CSFTOOL1.DSK. I cannot locate this one
anywhere.

Additionally, will FP31 add this modification (DHCP) to MPTS? If so, I can
find no reference to DHCP. Again, this is OS/2 Warp Connect version 3.0 (not
4).

Thanks!

[Jonathan Alumbaugh]

In message <5v98ql$d...@news.or.intel.com> - DanielX...@ccm.ut.intel.com
(Daniel Juarez) writes:
:>
:>Thank you. I found the DSK disks (2 of them). But, there is mention of a

:>third "MUST HAVE" diskette called CSFTOOL1.DSK. I cannot locate this one
:>anywhere.

I assume these are the Corrective Service Facility tools. You might try using
the latest CSF utility, also available on that site. Look for WKICKR.ZIP on
http://www.cincyteamos2.org/masterupdate/masterupdate.html

:>
:>Additionally, will FP31 add this modification (DHCP) to MPTS? If so, I can

:>find no reference to DHCP. Again, this is OS/2 Warp Connect version 3.0 (not
:>4).

:>

I haven't installed FP31, but based on past experience, I doubt it. IBM
usually packages these fixes separately, and yes, this will add DHCP to
Connect.

Jon Alumbaugh, MCSE

(alum...@chicagonet.net)

[Alex J Tetreault]

We have DHCP running on our Warp 3 machines even though the TCPCFG program doesn't give you the option of using it. All we did was
replace the \mptn\bin\setup.cmd with one that makes the calls necessary to run DHCP. Here are the contents:

route -fh
arp -f
dhcpstrt -i lan0
ipgate off

This will start the DHCP client.

* * * * Original Message * * * *

In article <5v3paj$c...@news.or.intel.com> Daniel Juarez of Intel Corporation writes:

Is there an MPTS fixpack that provides OS/2 WARP v 3.0 with DHCP
capabilities???

Thank you,
Dan

* * * * End Original Message * * * *