Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Change PCI Address for SW under MS-DOS

55 views
Skip to first unread message

waelte...@gmail.com

unread,
Aug 15, 2020, 5:16:21 AM8/15/20
to
I have a software which running on ms-Dos and I need to modify the PCI Address for the SW because i need to replace the PC by Newer one. After searching in the software I found the address pci address was written as (PIO32/32T(PCI) 0x1020,4128),I found that 0x1020 is the"Base Address Registers" but i could not found the reference for the other number (4128), what is the number 4128 refers to knowing that it isn't Device ID or Vender ID?

JJ

unread,
Aug 15, 2020, 1:04:24 PM8/15/20
to
Check the details of the PCI device first, using one of below tools.

Craig Hart's PCI
https://www.bttr-software.de/freesoft/system.htm

Dr.Hardware
https://web.archive.org/web/20200206033014/http://retro-net.de/drhard/

Dr.Hardware is in German language, but it's not difficult to get info about
the PIC devices. Just look for text with the word "PCI" and/or "hardware".

Post the info once you have them.
0 new messages