Memmaker Problems. Pls Help.
H. MacDonald
is a Toshiba laptop 486/8Mb, the other an Everex Step 486/8Mb,
both running Dos 6.22. When I try to run Memmaker it goes through
the reboot process and all then says "No Upper Memory created" and
restores my original configuration. I tried Qemm 7.5 also and
received roughly the same results. Any ideas anybody?? Thanks.
Yvan Loranger
Try turning off shadowing &/or caching of memory from C800-EFFF (through
the bios's cmos).
--
Merci.......................Yvan Since I am my own employer,
Internet: bq...@freenet.carleton.ca my opinions ARE those of my employer.
Alan Alvarez
>From: "H. MacDonald" <he...@phyres.lan.mcgill.ca>
>Subject: Memmaker Problems. Pls Help.
>Date: Thu, 30 Nov 1995 13:32:34 -0500
>Get this. On two machines I am having the same problem. One
>is a Toshiba laptop 486/8Mb, the other an Everex Step 486/8Mb,
>both running Dos 6.22. When I try to run Memmaker it goes through
>the reboot process and all then says "No Upper Memory created" and
>restores my original configuration. I tried Qemm 7.5 also and
>received roughly the same results. Any ideas anybody?? Thanks.
Hi!
Key in MEM, post it, also post your autoexec.bat and config.sys
Any questions, email me
Good luck!
Alan
Alvarez Consulting
PC Support
Specializing in Small Business Support
Hardware - Software
Installation - Setup - Support
(610) 935-0948 Voice
(610) 935-8272 Fax
alv...@voicenet.com
Henry MacDonald
CREATED" when running MEMMAKER under DOS 6.2. Here are my critical files. I have
no access to upper memory
The machine is a Toshiba laptop T4400SXC with very few config options. I tried
Cache enabled/disabled. I have no control over shadow rom. Does Anyone know what
is going on here? Any suggestions would be greatly appreciated.
AUTOEXEC.BAT
-------------
@Echo Off
PROMPT $p$g
goto %config%
:NOCD
lh C:\DOS\SMARTDRV.EXE
PATH C:\QEMM;C:\SPRY\BIN;C:\DOS;C:\WINWORD;C:\EXCEL;C:\WINDOWS;C:\XTGOLD;C:\TSCSI
set temp=c:\dos
LH C:\DOS\SHARE.EXE /l:500 /f:5100
set mouse=C:\BALLPT
mouse
set pcws=c:\pcws
CD\NET
lh lsl
lh smcplus
lh ipxodi
netx.exe /ps=phyres
C:\SPRY\BIN\tcpip
cd\
f:login
GOTO END
:CD
LH C:\TSCSI\MSCDEX /d:TSLCD /m:10
lh C:\DOS\SMARTDRV.EXE
SET
PATH=C:\QEMM;C:\SPRY\BIN;C:\DOS;C:\WINWORD;C:\EXCEL;C:\WINDOWS;C:\XTGOLD;C:\TSCSI
set temp=c:\dos
LH C:\DOS\SHARE.EXE /l:500 /f:5100
set mouse=C:\BALLPT
C:\BALLPT\mouse
set pcws=c:\pcws
GOTO END
:END
CONFIG.SYS
-----------
[MENU]
menuitem=nocd, Network/No CD-ROM
menuitem=cd, CD-ROM/No Network
[nocd]
rem DEVICE=C:\QEMM\QEMM386.SYS RAM X=C000-D000
rem DEVICE=C:\QEMM\QDPMI.SYS SWAPFILE=DPMI.SWP SWAPSIZE=1024
DEVICE=c:\DOS\HIMEM.SYS
DEVICE=c:\dos\EMM386.EXE RAM I=E800-EFFF
DOS=HIGH,UMB
FILES=50
SHELL=C:\DOS\COMMAND.COM C:\DOS\ /E:756 /p
STACKS=9,256
BUFFERS=10,0
[cd]
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE RAM NOEMS VERBOSE I=E800-EFFF
DOS=HIGH,UMB
FILES=50
SHELL=C:\DOS\COMMAND.COM C:\DOS\ /E:756 /p
STACKS=9,256
BUFFERS=10,0
Device=C:\TSCSI\MA348.SYS
Device=C:\TSCSI\TSLCDR.SYS /d:TSLCD
[common]
Rem DEVICE=C:\DOS\SETVER.EXE
RESULTS OF MEM/C
--------------------------------
Modules using memory below 1 MB:
Name Total = Conventional + Upper Memory
-------- ---------------- ---------------- ----------------
MSDOS 16,621 (16K) 16,621 (16K) 0 (0K)
HIMEM 1,168 (1K) 1,168 (1K) 0 (0K)
EMM386 4,144 (4K) 4,144 (4K) 0 (0K)
COMMAND 3,488 (3K) 3,488 (3K) 0 (0K)
SMARTDRV 29,024 (28K) 29,024 (28K) 0 (0K)
SHARE 17,904 (17K) 17,904 (17K) 0 (0K)
MOUSE 16,976 (17K) 16,976 (17K) 0 (0K)
Free 563,792 (551K) 563,792 (551K) 0 (0K)
Memory Summary:
Type of Memory Total = Used + Free
---------------- ---------- ---------- ----------
Conventional 654,336 90,544 563,792
Upper 0 0 0
Reserved 132,096 132,096 0
Extended (XMS) 11,796,480 2,490,368 9,306,112
---------------- ---------- ---------- ----------
Total memory 12,582,912 2,713,008 9,869,904
Total under 1 MB 654,336 90,544 563,792
Largest executable program size 563,392 (550K)
Largest free upper memory block 0 (0K)
MS-DOS is resident in the high memory area.