Serial port tracer for windows 3.1x needed
Markus R. Keßler
perhaps someone could help me here:
I'm looking for a serial port tracer for windows 3.1x which allows to
monitor every data that goes out or comes in via com1 or com2.
Some replace the serial port driver and promise to monitor the data
transmitted, but up to now I had no luck.
Also, there's an application out which does a kind of active simulating
and needs 3 ports instead of 1.
This is also not what I'm looking for. It should be a slim and simple
tool which just corresponds with the com driver and displays what it
finds.
Anyone already been working with such a tool?
And, yes, I need this for debugging my 56k modem problem.
Best regards,
Markus
--
Please reply to group only.
For private email please use http://www.dipl-ing-kessler.de/email.htm
--
Please reply to group only.
For private email please use http://www.dipl-ing-kessler.de/email.htm
John Dulak
Markus:
Would this work for you?
http://www.programmersheaven.com/zone16/cat428/index.htm
Listen
Is a Windows application designed to monitor serial data
communications utilizing the receive line of one or more serial COM
ports. Windows 3.1, Windows for Workgroups 3.11, or Windows '95 is
required. At least one free serial port is required, however, to be an
effective communications monitor ...
Size: 189 Kb Downloads: 2566 Updated: 1999-11-20 Rating: (Not Rated)
http://www.programmersheaven.com/download/14091/download.aspx
--
\\\||///
------------------o000----(o)(o)----000o----------------
----------------------------()--------------------------
'' Madness takes its toll - Please have exact change. ''
John Dulak Gnomeway Services
rk...@ca.rkba.cid
wrote:
|>Salve populus mundi,
|>
|>perhaps someone could help me here:
|>
|>I'm looking for a serial port tracer for windows 3.1x which allows to
|>monitor every data that goes out or comes in via com1 or com2.
|>
|>Some replace the serial port driver and promise to monitor the data
|>transmitted, but up to now I had no luck.
|>Also, there's an application out which does a kind of active simulating
|>and needs 3 ports instead of 1.
|>This is also not what I'm looking for. It should be a slim and simple
|>tool which just corresponds with the com driver and displays what it
|>finds.
|>
|>Anyone already been working with such a tool?
|>
|>And, yes, I need this for debugging my 56k modem problem.
|>
|>Best regards,
|>
|>Markus
|>
|>--
|>Please reply to group only.
|>For private email please use http://www.dipl-ing-kessler.de/email.htm
For DOS access there's Battaglia (CTSSPU13.EXE CTS Serial Port
Utilities, Version 1.3).....
Modemsta at:
Internet: tedd...@pobox.com
Other E-mail: http://pobox.com/~teddyware
They all work good and debug on the fly such as com4 addressed as the
non-existent com3, in actuality, so this is corrected in Dos for Win3.1
--
Triad Productions-FantallaŽ~EZine~ParaNovel
National Association of Assault Research
(http://tarbitch.balder.prohosting.com/htmlconc.html)