The DVD passes the media check function.
A few questions:
Is there any option at the yaboot command line I could use to either
force text or a vga type video mode to see if this is what's causing
the trouble?
Should I attempt to build the RHEL source and apply a patch (http://
cruxppc.org/forum/viewtopic.php?f=5&t=333) and then attempt to
configure yaboot to try this image instead of using the install DVD?
I'm thinking I could source the rpms from the DVD, would just need to
copy the OS files and setup the partitioned disk space to start in a
dual install type of configuration...
Thanks in advance.
Hi there
I have an Intellistation 285 as well which is happily running Yellow Dog
Linux 6.2. It originally came with the GXT6500 which I replaced with a
GXT135P. This makes for an easy life as running an RHEL based distro is
then a straightforward exercise. I can confirm that RHEL 5.5 will boot
into Anaconda without any difficulty for a full graphical install using
the GXT135P.
Perhaps you could alo install over a serial console or vnc?
Best regards
Pat
Good idea. No dice on trying to get the install kernel to come up as
'text' or 'console=ttyS0,9600'. I modified yaboot.config with those
options as parameters to append in the image definition. I know that
definition was being sourced, but the install kernel looks like it
ignores the pass in parameters. I"ll look for a GXT135P.
What chip is the Power Intellistation?
It might be that they dropped support for the version of Power Architecture.
I *know* that RHEL 6 won't install on < Power6
jerry
--
// Jerry Heyman | "Congress does not draw to its halls
// Amiga Forever :-) | those who love liberty, it draws those
\\ // heymanj at acm dot org | who love power." Judge Andrew Napolitano
\X/ http://www.hobbeshollow.com
> robers97 wrote:
>
> >
> >>
> >> Perhaps you could alo install over a serial console or vnc?
> >>
> >
> > Good idea. No dice on trying to get the install kernel to come up
> > as 'text' or 'console=ttyS0,9600'. I modified yaboot.config with
> > those options as parameters to append in the image definition. I
> > know that definition was being sourced, but the install kernel
> > looks like it ignores the pass in parameters. I"ll look for a
> > GXT135P.
Hi Jerry
>
> What chip is the Power Intellistation?
> It might be that they dropped support for the version of Power
> Architecture. I *know* that RHEL 6 won't install on < Power6
>
> jerry
The chip is a POWER5+ in the Intellistation 285 model. I use YDL 6.2
on mine but the installer for RHEL 5.5 will start up (graphically) with
no problems provided the graphics card is a GXT135P.
I was aware that RHEL6 will support ppc64 only whereas RHEL5 supports
ppc and ppc64. I didn't hear they had dropped support for POWER5 :(
Pat
> On Wed, 29 Dec 2010 21:08:11 -0500
> Jerry Heyman <hey...@acm.org> wrote:
>
>> robers97 wrote:
>>
>> >
>> >>
>> >> Perhaps you could alo install over a serial console or vnc?
>> >>
>> >
>> > Good idea. No dice on trying to get the install kernel to come up
>> > as 'text' or 'console=ttyS0,9600'. I modified yaboot.config with
>> > those options as parameters to append in the image definition. I
>> > know that definition was being sourced, but the install kernel
>> > looks like it ignores the pass in parameters. I"ll look for a
>> > GXT135P.
>
> Hi Jerry
>
>>
>> What chip is the Power Intellistation?
>> It might be that they dropped support for the version of Power
>> Architecture. I *know* that RHEL 6 won't install on < Power6
>>
>> jerry
>
> The chip is a POWER5+ in the Intellistation 285 model. I use YDL 6.2
> on mine but the installer for RHEL 5.5 will start up (graphically) with
> no problems provided the graphics card is a GXT135P.
This has been a problem for Linux on PPC - lack of graphic card support :-(
Not sure if it's because IBM doesn't release the information or because
no vendors are actually testing their cards w/PPC.
> I was aware that RHEL6 will support ppc64 only whereas RHEL5 supports
> ppc and ppc64. I didn't hear they had dropped support for POWER5 :(
It is unfortunate :-(
>
> Pat
cheers,
Nello
I downgraded to the GXT135P and have it working now. Thanks!
__cut__
>
> I downgraded to the GXT135P and have it working now. Thanks!
hi,
when you run X.Org, do you have shifted colors or is it fine ?
thanks,
Nello
--
CRUX PPC user!
Hi Nello
I have no issue with shifted colors on Xorg - all looks fine with YDL
6.2 on the Intellistation 285 / GXT135P combination for
me.
All the best
Pat