Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
archive tape 5945L-2 info
2 views
Skip to first unread message
BARRY TITMARSH
Oct 4, 1993, 1:28:14 PM10/4/93
to
I have been useing this drive for QIC-02 + linux now for 6 months
no problem... But i am curious about the jumpers on the drive
i have never moved them..
but: what does RP0 and RP1 do ?? these jumpers are the only
ones on the drive and are located near the 4 pin power socket.
marked RP0 and RP1 and have 2 positions 0 and 1
So anyone know what these jumpers are for.??
Also i have another drive
same as above but it has the QIC SC400 type of card mounted below it.
some one told me this card has scsi connections to it.. I did not
belive it. i think this card has to have the SC402 Host adapter
card to make the connect between the PC hostadapter and the card mounted
in a box under the drive.. together makeing the drive a 5.25 inch full
height. box.
Any info on any the above Please
Barry.. btit...@esoc.bitnet
Thanks.
no problem... But i am curious about the jumpers on the drive
i have never moved them..
but: what does RP0 and RP1 do ?? these jumpers are the only
ones on the drive and are located near the 4 pin power socket.
marked RP0 and RP1 and have 2 positions 0 and 1
So anyone know what these jumpers are for.??
Also i have another drive
same as above but it has the QIC SC400 type of card mounted below it.
some one told me this card has scsi connections to it.. I did not
belive it. i think this card has to have the SC402 Host adapter
card to make the connect between the PC hostadapter and the card mounted
in a box under the drive.. together makeing the drive a 5.25 inch full
height. box.
Any info on any the above Please
Barry.. btit...@esoc.bitnet
Thanks.
0 new messages