Thanks,
Dave...
: I've got a Kaypro 2X and I want to add a harddisk. I also have a
Yes, the pinout is the same. You will need to mount the interface card
and the harddisk controller and make up ribbon cables to connect
them. You should be aware that the hard disk data cable (20 leads)
should be connected to J2 on the controller and set as the second DS
selection on the drive. You will also need the TurboROM disks, unless
you already have them.
: Thanks,
: Dave...
- don
do...@cts.com
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Don Maslin - Keeper of the Dina-SIG CP/M System Disk Archives
Chairman, Dina-SIG of the San Diego Computer Society
Clinging tenaciously to the trailing edge of technology.
Sysop - Elephant's Graveyard (CP/M) Z-Node 9 - 619-454-8412
*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*--*
see old system support at http://www.psyber.com/~tcj/
visit the "Unofficial" CP/M Web site at http://www.devili.iki.fi/cpm/
with Mirror at http://www.mathcs.emory.edu/~cfs/cpm/
Don Maslin wrote:
>
> Yes, the pinout is the same. You will need to mount the interface card
> and the harddisk controller and make up ribbon cables to connect
> them. You should be aware that the hard disk data cable (20 leads)
> should be connected to J2 on the controller and set as the second DS
> selection on the drive. You will also need the TurboROM disks, unless
> you already have them.
>
Thanks, Don. That's the information I needed before ordering the
Advent Disk formatter software.
Dave...
Well, that is fine if you like your drive oriented vertically. But,
if you prefer them horizontal...
- don