How to Install and Use Digitus Rs 232 Serial Expresscard Driver
If you need to connect a serial device to your laptop or PC, you might need a Digitus Rs 232 Serial Expresscard. This is a device that allows you to add a serial port to your computer through an ExpressCard slot. You can use it for various applications, such as data transfer, communication, programming, and more.
However, before you can use the Digitus Rs 232 Serial Expresscard, you need to install the driver for it. The driver is a software that enables your computer to communicate with the device. Without the driver, your computer will not recognize the device or function properly.
Digitus Rs 232 Serial Expresscard Driver
In this article, we will show you how to install and use the Digitus Rs 232 Serial Expresscard driver. We will also provide some tips and troubleshooting steps in case you encounter any problems.
How to Install Digitus Rs 232 Serial Expresscard Driver
The installation process of the Digitus Rs 232 Serial Expresscard driver is simple and straightforward. Here are the steps you need to follow:
Insert the Digitus Rs 232 Serial Expresscard into an available ExpressCard slot on your laptop or PC.
Connect the serial device to the serial port on the Digitus Rs 232 Serial Expresscard using a serial cable.
Turn on your computer and wait for it to boot up.
Insert the CD-ROM that came with the Digitus Rs 232 Serial Expresscard into your CD-ROM drive.
Follow the instructions on the screen to install the driver. You might need to restart your computer after the installation is complete.
Alternatively, you can download the latest version of the driver from the official website of Digitus. You can find the driver under the category "Archive Products, Driver & Manuals". Select your model number and download the driver file. Then, run the file and follow the instructions on the screen to install the driver.
How to Use Digitus Rs 232 Serial Expresscard Driver
Once you have installed the driver, you can start using the Digitus Rs 232 Serial Expresscard. Here are some tips on how to use it:
To check if the device is working properly, you can open Device Manager on your computer and look for "Ports (COM & LPT)". You should see a new entry named "Digitus RS-232 ExpressCard (COMx)", where x is a number assigned by your computer. This is the name of your serial port.
To use the serial port, you need a software that supports serial communication. For example, you can use HyperTerminal, PuTTY, or Arduino IDE. You can configure the software with the following settings: baud rate: 115200 bps, data bits: 8, parity: none, stop bits: 1, flow control: none. You also need to select the correct COM port number that matches your device.
To test if the serial communication is working, you can send and receive data between your computer and your serial device. For example, you can type some text in HyperTerminal and press Enter. You should see the same text echoed back on your serial device. Or, you can send some commands from your serial device and see the responses on HyperTerminal.
Troubleshooting Digitus Rs 232 Serial Expresscard Driver
If you encounter any problems with using the Digitus Rs 232 Serial Expresscard driver, here are some possible solutions:
If your computer does not detect the device or shows an error message, make sure that you have inserted the device properly into the ExpressCard slot. Also, make sure that you have installed the correct driver for your operating system and model number.
If your serial communication is not working or is unstable, make sure that you have configured your software with the correct settings for baud rate, data bits, parity, stop bits, and flow control. Also, make sure that you have connected your serial device with a good quality serial cable.
If you still have problems with using the device