Printing a file
Fabian Steiner
I am currently working on an application where the user is able to
create new worksheets and to delete existing ones. All of these
worksheets have the same structure (--> template?), only some values
should be changed. A minimal example would be something like this:
Name: ...........
Role: ............
Address: ............
The values are stored in a SQLite database. Now I would like to offer
the possibility to print out a single record on a DinA4 paper. In order
to do this, the dots (...) above of course have to be replaced by the
current record's values and the different parts have to fit on one page.
Unfortunately I don't know how to realize this, since also some images
and different boxes should be printed out. As the whole application is
based on QT, QPrinter might be used, but I couldn't find any examples
how to use it.
What do you suggest? Which format should the template have? (XML, etc.?)
Any hints appreciated!
Cheers,
Fabian Steiner
Jeremy Sanders
> Unfortunately I don't know how to realize this, since also some images
> and different boxes should be printed out. As the whole application is
> based on QT, QPrinter might be used, but I couldn't find any examples
> how to use it.
QPrinter is easy to use. You just draw to the page the same way as you talk
to the screen with a QPainter.
prnt = qt.QPrinter()
# you can also vary options like colour, doc name, dpi here
# display dialog box to user (you can actually leave this out)
if prnt.setup():
painter = qt.QPainter()
painter.begin(printer)
# do stuff to draw to painter
painter.end(printer)
# do this between each page
printer.newPage()
# ... more pages can be printed to a painter
It's very easy to do. If you want to handle multiple pages and so on,
there's a bit of work to do to interface to the dialog to get the
user-selected page range, etc.
Jeremy
--
Jeremy Sanders
http://www.jeremysanders.net/
David Boddie
> Fabian Steiner wrote:
>
> > Unfortunately I don't know how to realize this, since also some images
> > and different boxes should be printed out. As the whole application is
> > based on QT, QPrinter might be used, but I couldn't find any examples
> > how to use it.
[...]
> It's very easy to do. If you want to handle multiple pages and so on,
> there's a bit of work to do to interface to the dialog to get the
> user-selected page range, etc.
That's where QPrintDialog comes in:
http://doc.trolltech.com/4.1/qprintdialog.html
It's also secretly available in Qt 3 via the QPrinter.setup() method:
printer = QPrinter()
printer.setup()
# Now, paint onto the printer as usual.
David
Fabian Steiner
Thank you so far, but now I got stuck again :-/
Jeremy Sanders wrote:
> QPrinter is easy to use. You just draw to the page the same way as you talk
> to the screen with a QPainter.
>
> prnt = qt.QPrinter()
> # you can also vary options like colour, doc name, dpi here
>
> # display dialog box to user (you can actually leave this out)
> if prnt.setup():
> painter = qt.QPainter()
> painter.begin(printer)
> # do stuff to draw to painter
> painter.end(printer)
> # do this between each page
> printer.newPage()
This is what I have so far:
app = QApplication(sys.argv)
printer = QPrinter(QPrinter.PrinterResolution)
if printer.setup():
printer.setPageSize(printer.A4)
painter = QPainter(printer)
metrics = QPaintDeviceMetrics(painter.device())
marginHeight = 6
marginWidth = 8
body = QRect(marginWidth, marginHeight, metrics.widthMM() - 2 *
marginWidth, metrics.heightMM() - 2 * marginHeight)
painter.drawRect(body)
painter.end()
Doing so I hoped to get a rectangle which is as big as an A4 paper (with
a small border), but unfortunately it is much smaller. Moreover, I ask
myself whether it is necessary that in order to write text on the paper,
I always have to pass the proper x, y values to QPainter.drawText().
Isn't there any other possibility? How do I get these values?
Thanks in advance,
Fabian Steiner
David Boddie
> This is what I have so far:
>
> app = QApplication(sys.argv)
> printer = QPrinter(QPrinter.PrinterResolution)
> if printer.setup():
> printer.setPageSize(printer.A4)
> painter = QPainter(printer)
> metrics = QPaintDeviceMetrics(painter.device())
> marginHeight = 6
> marginWidth = 8
> body = QRect(marginWidth, marginHeight, metrics.widthMM() - 2 *
> marginWidth, metrics.heightMM() - 2 * marginHeight)
> painter.drawRect(body)
> painter.end()
>
> Doing so I hoped to get a rectangle which is as big as an A4 paper (with
> a small border), but unfortunately it is much smaller.
Surely you meant to use
body = QRect(marginWidth, marginHeight,
metrics.width() - 2 * marginWidth,
metrics.height() - 2 * marginHeight)
> Moreover, I ask myself whether it is necessary that in order to write
> text on the paper, I always have to pass the proper x, y values to
> QPainter.drawText().
> Isn't there any other possibility? How do I get these values?
That depends on what kind of text you're drawing (paragraphs of text
vs. simple labels). See the application.py example in the examples3
directory of the PyQt3 distribution for code that implements a simple
text editor with support for printing. Information about text and font
metrics can be found with the QFontMetrics class:
http://doc.trolltech.com/3.3/qfontmetrics.html
PyQt4 supports Qt 4's new rich text facilities, so it's easier to
format text for printing than it is in Qt 3. A more advanced rich text
editor is only available in the C++ Qt 4 demos, but there are other
examples bundled with PyQt4 that show how to print "simple" documents:
http://www.riverbankcomputing.co.uk/
Finally, it's worth pointing out that there's a higher concentration of
people with experience in these matters reading the PyQt/PyKDE mailing
list:
http://mats.imk.fraunhofer.de/mailman/listinfo/pykde
Good luck with your printing,
David
Jeremy Sanders
> That's where QPrintDialog comes in:
>
> http://doc.trolltech.com/4.1/qprintdialog.html
>
> It's also secretly available in Qt 3 via the QPrinter.setup() method:
>
> printer = QPrinter()
> printer.setup()
> # Now, paint onto the printer as usual.
No - that was in my example. The work I was refering to was taking the
user's input to the dialog and writing the pages to the device in the right
order (I don't think this is done automatically).
David Boddie
your code. If you're creating highly customized content then I think
you'll always need to think about getting the pages to the printer in
the right order.
For rich text documents, there's code that does this in the Qt 3 text
drawing demo (see the filePrint() method in the
examples/demo/textdrawing/textedit.cpp file).
In Qt 4, the demos/textedit demo does this with a lot less code.
Or are you think of something else?
David
Fabian Steiner
Thank you very much for this hint! Thanks to this example I was able to
print out my first pages :)
But some questions still remain. At the moment I am using
QSimpleRichtext and a personal HTML-File. I had a look at the
example.html of textedit.cpp (/usr/share/doc/qt-4.1.1/demos/textedit)
and found out that it contains quite a lot of proprietary HTML elements,
attributes and CSS style definitions. So far I didn't even know that
QSimpleRichText even supports CSS since I couldn't find anything related
to this point in the official docs (--> e.g. QStylesheet).
Is there any tool out there with which I can write those special HTML
files? I am quite familiar with HTML and CSS but I don't want to waste
my time with that.
Regards,
Fabian Steiner
David Boddie
> David Boddie wrote:
> > In Qt 4, the demos/textedit demo does this with a lot less code.
> >
> > Or are you think of something else?
>
> Thank you very much for this hint! Thanks to this example I was able to
> print out my first pages :)
That's good to hear. :-)
> But some questions still remain. At the moment I am using
> QSimpleRichtext and a personal HTML-File. I had a look at the
> example.html of textedit.cpp (/usr/share/doc/qt-4.1.1/demos/textedit)
> and found out that it contains quite a lot of proprietary HTML elements,
> attributes and CSS style definitions. So far I didn't even know that
> QSimpleRichText even supports CSS since I couldn't find anything related
> to this point in the official docs (--> e.g. QStylesheet).
I think I may have confused you by mentioning Qt 4. Since you are using
QSimpleRichText, you must be using Qt 3, so you should probably ignore
what I said about the /usr/share/doc/qt-4.1.1/demos/textedit demo. :-/
> Is there any tool out there with which I can write those special HTML
> files? I am quite familiar with HTML and CSS but I don't want to waste
> my time with that.
You don't need to include all those style attributes in the HTML.
Anyway, that's a different version of Qt to the one you are using, so
you can safely ignore it. You should probably look at the text drawing
part of the demo included in Qt 3 (examples/demo/textdrawing) and see
how printing is done for the rich text editor there (in the
TextEdit::filePrint() function). Translating it to Python _shouldn't_
be a problem.
I hope I didn't confuse you too much by talking about two different
versions of Qt at the same time.
Let us know how it goes.
David
Florian Diesch
I would either use something like ReportLab to create PDF or some
external type-setting language like LaTeX, *roff or docbook if they are
availabled.
Florian
--
No no no! In maths things are usually named after Euler, or the first
person to discover them after Euler.
[Steven D'Aprano in <pan.2005.11.22....@REMOVETHIScyber.com.au>]
Florian Diesch
I would either use something like ReportLab to create PDF or some