I am building a house and have my wiring pretty much settled. Except
I just realized I want to allow for future expansion of security
cameras on all 4 sides of the house.
Now I have no idea what I would use, maybe cheap web cams or something
more solid, I dont know at this point.
But which is the best wiring to put in place? RG6 or CAT5E, or
perhaps something else. Right now one of those two choices would be
easier since that is what the house is being wired for.
Oh, while I am here. I want to run an RG6 from the attic to my home
run so that I can add a TV antenna. Any thougts on this? What would
I run that cable through to distribute it throughout the house (I am
assuming the signal wont be strong enough without an amp)/ Is RG6 the
cable to use to get an antenna signal sent throughtout the house?
Thanks ahead for any answers !
Scott
1 CAT5 or CAT5e
1 RG6 coax
1 18/2 stranded cable
Be sure you use cables rated for in-wall use.
If you need help, feel free to call. I sell this stuff (wire, cameras, home
automation, tube tops, etc. -- online.
Regards,
Robert
=============================>
Bass Home Electronics, Inc
2291 Pine View Circle
Sarasota · Florida · 34231
877-722-8900 Sales & Tech Support
941-925-9747 Fax
941-232-0791 Wireless
Nextel Private ID - 161*21755*1
http://www.bass-home.com
=============================>
"Robert L. Bass" <rober...@comcast.net> wrote in message
news:SN-dnXg1-s2...@giganews.com...
Regards,
Robert
=============================>
Bass Home Electronics, Inc
2291 Pine View Circle
Sarasota · Florida · 34231
877-722-8900 Sales & Tech Support
941-925-9747 Fax
941-232-0791 Wireless
Nextel Private ID - 161*21755*1
http://www.bass-home.com
=============================>
"King" <kin...@hotmail.com> wrote in message
news:f242b.259425$hOa....@news02.bloor.is.net.cable.rogers.com...
"Robert L. Bass" <rober...@comcast.net> wrote in message
news:SN-dnXg1-s2...@giganews.com...
That's pure BS. The signal travels on the surface of the center conductor
which is copper.
"Frank Olson" <(remove the "dot") ho...@shawdot.ca> wrote in message
news:fxE2b.843891$ro6.16...@news2.calgary.shaw.ca...
> "King" <kin...@hotmail.com> wrote in message
> news:7sB2b.269000$4UE.1...@news01.bloor.is.net.cable.rogers.com...
> > Today I went to a security shop and they advised me not to use RG6 they
> said
> > The picture would not be clear and that I should use RG59 instead. I
he
> > said because of the Aluminium in the RG6 which is not good for the
> video....
> > Has anybody heard of this????
>
>
> You can use either RG6U or RG59U. Try for a larger center conductor if
you
> can...
>
>
"Brutus" <Bru...@insightbb.com> wrote in message
news:%TS2b.106396$2x.3...@rwcrnsc52.ops.asp.att.net...
These are the guys who'd demand that you not use 14 Ga zip cord for
speakers ($20 for 100') and demand you buy (from them) $200 of oxygen
deprived magical speaker wire which, technically, can handle audio
signals up to 200KHz. Which is important for bat music. Otoh, my
pal, installing $20k stereos for people who won't use CD's because
of their low quality, uses zip cord.
For your own satisfaction, put ends on an RG6, leaving lying on the
floor and run your video across it and look.
"Chuck Y" <New...@Aug2003.snew.com> wrote in message
news:sr94b.309576$YN5.213083@sccrnsc01...
>I found this useful..
>http://nt11.groupm7.com/csispeco/faqs.asp
Couldn't they have made it harder to read?
(Ouch!)
-
Gently-used Firestone tires for sale at discount!
-----------
http://diversify.com Website Application Programming
King wrote:
> I found this useful..
> http://nt11.groupm7.com/csispeco/faqs.asp
Right, which basically says (in a not very authoritative way,
sounding more like "I'm bill and have been doing this a while
and here is my truth) :
RG59 is thinner than RG6.
I used RG59 a bunch. It was quick to crimp and (as noted)
flexible and it was easier to carry 6 50' rolls of in your
kit. RG6 can be a pain - it's often stiff and its certainly
heavier.
Now, I have no qualms using '59 from the wall to the VCR.
I wouldn't use my orange extension cord inside a wall, I'd not
drop RG59 in my walls.
Robert is right though: Toss along a CAT5 (or CAT3) (useful if you
ever have pan/tilt via serial) and an 18/2 pair for power.
RG6 and RG59 are both used extensively for video. For homes,
and in making TV (ok, video assist to go with film, but still
critical).
> "Chuck Y" <New...@Aug2003.snew.com> wrote in message
> news:sr94b.309576$YN5.213083@sccrnsc01...
>
>>"computer scientology".
>>
>>These are the guys who'd demand that you not use 14 Ga zip cord for
>>speakers ($20 for 100') and demand you buy (from them) $200 of oxygen
>>deprived magical speaker wire which, technically, can handle audio
>>signals up to 200KHz. Which is important for bat music. Otoh, my
>>pal, installing $20k stereos for people who won't use CD's because
>>of their low quality, uses zip cord.
>>
>>For your own satisfaction, put ends on an RG6, leaving lying on the
>>floor and run your video across it and look.
>>
>>King wrote:
>>
>>>Today I went to a security shop and they advised me not to use RG6 they
>
> said
>
>>>The picture would not be clear and that I should use RG59 instead. he
>>>said because of the Aluminium in the RG6 which is not good for the video....
>>>Has anybody heard of this????
>>>
>>>"Robert L. Bass" <rober...@comcast.net> wrote in message
>>>news:SN-dnXg1-s2...@giganews.com...
>>>>If you want to keep your options open so that you can choose any camera
> >>>you
>>>>like, run the following from the wiring closet to each camera site:
>>>>
>>>>1 CAT5 or CAT5e
>>>>1 RG6 coax
>>>>1 18/2 stranded cable
>>>>
>>>>Be sure you use cables rated for in-wall use.
>>>>
>>>>If you need help, feel free to call. I sell this stuff (wire, cameras,
>>>home
>>>>automation, tube tops, etc. -- online.
Actually, that's a copy of a FAQ page from one of the CCTV manufacturers.
> RG59 is thinner than RG6.
>
> I used RG59 a bunch. It was quick to crimp and (as noted)
> flexible and it was easier to carry 6 50' rolls of in your
> kit. RG6 can be a pain - it's often stiff and its certainly
> heavier.
>
> Now, I have no qualms using '59 from the wall to the VCR.
>
> I wouldn't use my orange extension cord inside a wall, I'd not
> drop RG59 in my walls.
>
> Robert is right though: Toss along a CAT5 (or CAT3) (useful if you
> ever have pan/tilt via serial) and an 18/2 pair for power.
>
> RG6 and RG59 are both used extensively for video. For homes,
> and in making TV (ok, video assist to go with film, but still
> critical).
Yup. RG6 is OK for any situation where RG59 might do. The converse is does
not necessarily hold true. Thus I prefer RG6. Truth be told, I prefer RG6
Q/S.
The CAT5 and 18/2 are just to make sure that no matter what you choose to
use you're covered.
"Robert L. Bass" <rober...@comcast.net> wrote in message
news:6amdnbN-A-N...@giganews.com...
Regards,
Robert
=============================>
Bass Home Electronics, Inc
2291 Pine View Circle
Sarasota · Florida · 34231
877-722-8900 Sales & Tech Support
941-925-9747 Fax
941-232-0791 Wireless
Nextel Private ID - 161*21755*1
http://www.bass-home.com
=============================>
> Is there a difference between RG6 and RG6U?
"Chuck Y" <New...@Aug2003.snew.com> wrote in message
news:ZnB4b.143997$2x.4...@rwcrnsc52.ops.asp.att.net...
Could be. RG59 is cheaper, lighter and less bulky than RG6 so they may
prefer to stock it.
"Chuck Y" <New...@Aug2003.snew.com> wrote in message
news:sr94b.309576$YN5.213083@sccrnsc01...