I have been told that the plug in filters won't fix the problem and i
need to replace the transformers with another brand transformer.
Is this my only solution?
Any suggestion's?
Thanks
Ernie
> I have malibu landscape lighting transformers that are screwing up my
> X-10 signals.
If it is a true "Core-&-Coil" transformer, I can not see how it could
bossibly screw up your powerline system. I suspect that it is either
noise from another source or you landscape lighting is actually using an
electronic 12v power supply.
> I have been told that the plug in filters won't fix the problem and i
> need to replace the transformers with another brand transformer.
The plug-in filter may not be able to fix it simply because they are
limited to 5 amps. What is the current draw of your landscape lighting
system? If over 5 amps, there are 20 amp filters but they are
hard-wired and not plug-in. Our p/n AF300 is a 20 amp, 277v (and down)
filter, approx 40:1 filtering at the frequency range which most effects
X-10 (80kHz-to-150kHz). Our web site will give you the particulars (but
you gotta be patient, we got the slowest web site on the net).
Hope this helps. -Phil K.
--
Phillip E. Kingery, PCC Tech Support
Reply to pkin...@act-solutions.com
Advanced Control Technologies, Inc.
Powerline Control Components
Website: http://www.act-solutions.com
(Please acknowledge any significant
msg, email is not as reliable
as some would have us believe.)
You could replace all your X-10 ith a reliable wireless RF system from
Lutron Electronics, Radio Ra. www.lutron.com