Anyone have any ideas?
--
Don K9SOA (EM77EX)
HF-2m-70cm-APRS
www.k9soa.net
Home of JEANNIE
The House That Listens
As seen on HGTV's Dream Builder Show
and the Featured Home of the Month
Home Automation magazine
March 2002 issue
How about a CueCat? They're cheap. I just took a look at EBay and
there were 35 items, some you can buy for $1.35 (S&H $3.00). There is
plenty of free software for the device.
--
Linux Home Automation Neil Cherry nch...@comcast.net
http://mywebpages.comcast.net/ncherry/ (Text only)
http://linuxha.sourceforge.net/ (SourceForge)
http://hcs.sourceforge.net/ (HCS II)
>On Tue, 03 Sep 2002 14:04:30 GMT, Don wrote:
>>Looking for a reasonable priced scanner that I can use to scan UPC codes on
>>supply items used in the home. What to keep an inventory and build a
>>shopping list when low points are reached.
>>
>>Anyone have any ideas?
>
>How about a CueCat? They're cheap. I just took a look at EBay and
>there were 35 items, some you can buy for $1.35 (S&H $3.00). There is
>plenty of free software for the device.
Just make sure you don't use the CueCat software. It's main purpose was to
track and report your activities.
---
http://www.laser.com/dhouston/bx24-pcb.htm
The CueCat works, but you have to be kind of fussy with the scan -- don't go
too fast, don't go too slow, etc. For that reason, I don't like any 'wand'
scanner.
If I tried using one of those to have my wife scan stuff, she'd give it up
pretty quickly, due to those issues. They are also very cheesy looking.
Better IMHO would be to find a surplus hand or countertop scanner (like a
symbol LS3000 for a hand scanner, currently one at $29.99 on ebay), either
at a swap meet or on e-bay.
Ryan
use...@erickson.myip.org
http://erickson.myip.org
"Neil Cherry" <n...@bgp558256bgs.ewndsr01.nj.comcast.net> wrote in message
news:slrnan9h9...@bgp558256bgs.ewndsr01.nj.comcast.net...
Oops I neglected that part, I think the Digital Convergence company
went out of business. If so then most likely their software will be of
little use. But I'm pretty sure that there is plenty of OpenSource
project that make use of the Cuecat.
"Ryan Erickson" <usene...@erickson.myip.org> wrote:
Thanks Dave for the info on the other scanner. Will check it out.
Since it will only be used by me, I can afford to be on the cheap and techie
side. Advantage of being single.
I was in Office Depot yesterday and they had a Symbol SPT 1500 on sale with
rebate for $99. This is a Palm III based unit with a non-contact laser scanner
that reads code 39 at 24 - 60 cm from the unit. It will even read barcodes in
daylight.
I fooled around with it in the store and it read most every barcode I pointed
it at.
Details can be found here:
http://www.symbol.com/products/mobile_computers/mobile_palm_pi_hdwr_data.html
Don <ky...@alltel.net> wrote in message
news:_pRd9.892$xp5.8...@news.alltel.net...
Many of the cuecats (perhaps all) can be modified with a jumper that will
make them unencrypted. That is, they will output normal text instead of
the stuff they normally do. This means you won't need a driver on one of
the modified ones.
Some cuecat links:
http://www.cexx.org/cuecat.htm
http://air-soldier.com/~cuecat/
Anthony