Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Question about SmartHome 1132CU programming
41 views
Skip to first unread message
Art Todesco
Apr 28, 2012, 8:13:01 PM4/28/12
to
I have and use a SH 1132CU with the "plus" software. Basically, my
house is on house code B, however, some stuff is on C. I have front
floods on C10 and rear floods on C9. In the 1132 programming I have a
macro that basically says, if B8 goes on, then do a C9 on and a C10 on.
Similarly, there is a 2nd macro that says, if B8 goes off, then do a
C9 off and a C10 off. However, if one of the manual controllers, set to
house code B, does an "all off", the 1132CU doesn't do anything. I was
wondering if someone has found a way to program the 1132CU that would
basically say, if you do a B, all off, it would recognize that and
subsequently do a C9 off and a C10 off. The reason for putting the
floods on C9 and C10, was to free up B9 and B10 for other things. Any
ideas? Thanks.
house is on house code B, however, some stuff is on C. I have front
floods on C10 and rear floods on C9. In the 1132 programming I have a
macro that basically says, if B8 goes on, then do a C9 on and a C10 on.
Similarly, there is a 2nd macro that says, if B8 goes off, then do a
C9 off and a C10 off. However, if one of the manual controllers, set to
house code B, does an "all off", the 1132CU doesn't do anything. I was
wondering if someone has found a way to program the 1132CU that would
basically say, if you do a B, all off, it would recognize that and
subsequently do a C9 off and a C10 off. The reason for putting the
floods on C9 and C10, was to free up B9 and B10 for other things. Any
ideas? Thanks.
Harold Sharpe
Apr 28, 2012, 11:14:01 PM4/28/12
to
all off
set it up as
If B all Off Turn C8 off
Delay 3 second
turn c9 off
Art Todesco
Apr 29, 2012, 2:27:59 PM4/29/12
to
it appears, so I never found it. A 'B All Off', now also does a 'C All
Off. '
0 new messages