Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
DID off analog trunks
0 views
Skip to first unread message
Joselito C. Santos
Aug 10, 1998, 3:00:00 AM8/10/98
to
I am currently assisting a customer with an Option 51 Nortel PABX (Rls
19 software) connect to the C.O. with a DMS Switch through analog DID
lines. We have configured our XUT card ports as Loop Dial Repeating,
Winkstart. For some reason the C.O. guys are having a problem making
this arrangement work. What type of card on the DMS ( I think it's a
DMS-100 that the C.O. is using) would be used to interface to the XUT
card on the PABX? Any info regarding this matter would be greatly
appreciated.
19 software) connect to the C.O. with a DMS Switch through analog DID
lines. We have configured our XUT card ports as Loop Dial Repeating,
Winkstart. For some reason the C.O. guys are having a problem making
this arrangement work. What type of card on the DMS ( I think it's a
DMS-100 that the C.O. is using) would be used to interface to the XUT
card on the PABX? Any info regarding this matter would be greatly
appreciated.
Jojo Santos
Eric Hildum
Aug 11, 1998, 3:00:00 AM8/11/98
to
Why don't you set the XUT to DID, instead of LDR?
Joselito C. Santos wrote:
--
---------------------------
Eric Hildum
Eric....@Japan.NCR.COM
Joselito C. Santos
Aug 11, 1998, 3:00:00 AM8/11/98
to
The Universal Trunk card is programmed as a DID trunk. Loop dial repeating
is the setting for the signaling type. Using a butt set, we are able to dial
into the PABX using any combination of DTN and DIP class of service, and IMM
or WNK start arrangement, so we know that the PABX programming isn't the
problem.
is the setting for the signaling type. Using a butt set, we are able to dial
into the PABX using any combination of DTN and DIP class of service, and IMM
or WNK start arrangement, so we know that the PABX programming isn't the
problem.
CHRISTOPHER W. (Chris) BOONE
Aug 11, 1998, 3:00:00 AM8/11/98
to Joselito C. Santos
Dont forget on wink start lines, the T/R is polarity sensitive!
Your butt set isnt.......try rolling tip/ring......
Sounds like your Telco is screwed up!!!
(or are they trying to DTMF in instead of DP? Also they MAY be set
for MF instead!!)
Your butt set isnt.......try rolling tip/ring......
Sounds like your Telco is screwed up!!!
(or are they trying to DTMF in instead of DP? Also they MAY be set
for MF instead!!)
Chris
Bill Schaffel
Aug 11, 1998, 3:00:00 AM8/11/98
to
If the DMS is using a line card for each DID line than your options are
loop start or ground start. Wink start is a trunk signal and would be
used on a PBX type trunk group (analog or digital).
loop start or ground start. Wink start is a trunk signal and would be
used on a PBX type trunk group (analog or digital).
0 new messages