Using CAB-OCT-V35MT cable and would like to convert one inter face to RS-232.
Croft, Glenn
Cisco serial connection to RS 232 male connection.
> -----Original Message-----
> From: Auspitz, Norman (CORP) [SMTP:norm.a...@corporate.ge.com]
> Sent: Thursday, September 10, 1998 6:16 AM
> To: Cisco
> Subject: FW: Using CAB-OCT-V35MT cable and would like to convert
> one interface to RS-232.
>
> Folks,
>
> I would like to thank everyone who replied to this question.
>
> As it turns out, no one had done this before (that we could find),
> although
> everyone thought it should work.
>
> We were able to use a pretty standard V.35 to RS232 interface
> converter
> device and successfully use two ports of a CAB-OCT-V35MT octopus cable
> as
> RS232 DTE connections.
>
> Best regards... Norm.
>
> > ----------
> > From: sco...@iworksys.com[SMTP:sco...@iworksys.com]
> > Sent: Wednesday, September 09, 1998 3:51 PM
> > To: Auspitz, Norman (CORP)
> > Subject: Re: Using CAB-OCT-V35-MT cable and would like to convert
> one
> > interfac e to RS-232.
> >
> > Yes.
> > I needed to do this for a Kentrox DSU/CSU at a customer recently.
> > I believe the pin diagram can be found at
> > http://www.kentrox.com/library/cables/cable_78900.html
> >
> > I had a local cable manufacturer put several together for me.
> > E-mail me if you would like a contact and phone number.
> >
> > Scott
> >
> >
> > Auspitz, Norman (CORP) wrote:
> >
> > > Folks,
> > >
> > > I originally submitted this to the Cisco Open Forum on CCO. They
> have
> > now
> > > suggested I submit this to this particular interest group:
> > >
> > > Looking for anyone who has ever tried to convert one of the
> interfaces
> > on
> > > the
> > >
> > > CAB-OCT-V35-MT cable from V.35 to RS-232.
> > >
> > > Any comments on whether this is possible or not?
> > >
> > > Everyone seems to agree we SHOULD be able to use a V.35 <===>
> RS232
> > > interface converter.
> > > Has anyone out there actually done this?
> > >
> > > TIA & Best regards... Norm.
> >
> >
> >