Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Bandwidth command usage on the 2924C-XL
0 views
Skip to first unread message
Gerard West
May 17, 1999, 3:00:00 AM5/17/99
to
On a Cisco Catalyst WS-C2924C-XL, how should the bandwidth subcommand be
used, if it should at all, in the VLAN interface configuration mode? The
switch is running under IOS 11.2(8)SA3.
used, if it should at all, in the VLAN interface configuration mode? The
switch is running under IOS 11.2(8)SA3.
******************************
Gerard West, ger...@cce.org
THE CENTER FOR COLLABORATIVE EDUCATION
http://www.cce.org
******************************
Preben Soeberg
May 18, 1999, 3:00:00 AM5/18/99
to
On a router, the bandwidth is used for metric calculations in some routing
protocols.
The only other use of the bandwidth command is for the load in "sh in"
command.
protocols.
The only other use of the bandwidth command is for the load in "sh in"
command.
Preben
Gerard West wrote in message <9269630...@news.Colorado.EDU>...
0 new messages