Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Async Routing Using an AUX port

0 views
Skip to first unread message

pvan...@pvanraay.on.bell.ca

unread,
Jan 23, 1995, 6:13:58 PM1/23/95
to

Has anybody had any experience doing Async. routing (TCP/IP - PPP) over the AUX
port of a Cisco router? I'm told that it will work but see no reference to it
in any of the software manuals. Also, what version of S/W is required?

Paul Van Raay
Note: My Mail ID is not yet active.

Bruce Pinsky

unread,
Jan 24, 1995, 10:57:26 PM1/24/95
to
Paul Van Raay writes:

==>
==>Has anybody had any experience doing Async. routing (TCP/IP - PPP) over the AUX
==>port of a Cisco router? I'm told that it will work but see no reference to it
==>in any of the software manuals. Also, what version of S/W is required?
==>


What version manuals are you looking at? It is the same as setting it
up on the Async ports of the CS-500 or 25xx AccessServers.

+-------------------------+-----------------------+---------------------------+
+ || || + + Bruce Pinsky +
+ || || + Cisco Systems, Inc. + Sr. Internetwork Supt Engr+
+ |||| |||| + 170 West Tasman Drive + Phone: (800) 553-24HR +
+ ..:||||||:..:||||||:.. + San Jose, CA 95134 + Fax: (408) 526-8787 +
+ Cisco Systems Inc. + + E-mail: b...@cisco.com +
+-------------------------+-----------------------+---------------------------+
| ** The Science of Networking Networks ** |
+-----------------------------------------------------------------------------+

0 new messages