Can't Ping from Serial0, but E0 works great - One address only?
scoot...@gmail.com
10.1.0.10 Win2003 Server DC
10.1.0.17 Win2008 Server DC/File Server
10.1.0.19 Win2008 Server Hyper-V Server
Nothing fancy on the servers.
I can Ping all of them from the router's Ethernet Interface (on the
same Subnet)
If I ping using the Serial 0 as the source Address, I can only Ping .
10 and .19
Same if I go from the servers to 10.254.0.37, .17 cannot Ping.
10.1.0.17 can ping things in other Subnets, just not from Serial0 of
the router Config below...
Help!!
Thanks, Scott<-
version 12.0
service timestamps debug uptime
service timestamps log uptime
!
hostname router
!
no logging console
!
ip subnet-zero
!
!
!
interface Ethernet0
ip address 10.1.0.3 255.255.0.0
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
media-type 10BaseT
!
interface Ethernet1
ip address 10.11.0.1 255.255.0.0
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
shutdown
!
interface Serial0
ip address 10.254.0.37 255.255.255.252
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
!
interface Serial1
no ip address
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
shutdown
!
interface Serial2
ip address 10.254.0.33 255.255.255.252
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
shutdown
!
interface Serial3
no ip address
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
shutdown
!
interface Serial4
no ip address
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
shutdown
!
interface Serial5
no ip address
no ip directed-broadcast
shutdown
!
router eigrp 2
redistribute rip
network 10.0.0.0
default-metric 1000 100 255 1 1500
no auto-summary
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.1.0.2
ip route 10.6.0.0 255.255.0.0 10.2.6.1
!
logging trap warnings
logging 10.1.0.13
access-list 133 permit icmp any any
!
line con 0
login
length 54
width 132
transport input none
line aux 0
line vty 0 4
login
length 54
width 132
!
end
@newmail.ru Andrew Lutov
s> Nothing fancy on the servers.
s> I can Ping all of them from the router's Ethernet Interface (on the
s> same Subnet)
s> If I ping using the Serial 0 as the source Address, I can only Ping .
s> 10 and .19
s> Same if I go from the servers to 10.254.0.37, .17 cannot Ping.
s> 10.1.0.17 can ping things in other Subnets, just not from Serial0 of
s> the router Config below...
s> Help!!
Over SerialX == over remote router.
Remote router know route to net 10.1.0.0/16?
Sam Wilson
<3680c104-098b-4a41...@f40g2000pri.googlegroups.com>,
scoot...@gmail.com wrote:
> So I have three Server machines
> 10.1.0.10 Win2003 Server DC
> 10.1.0.17 Win2008 Server DC/File Server
> 10.1.0.19 Win2008 Server Hyper-V Server
>
> Nothing fancy on the servers.
>
> I can Ping all of them from the router's Ethernet Interface (on the
> same Subnet)
> If I ping using the Serial 0 as the source Address, I can only Ping .
> 10 and .19
>
> Same if I go from the servers to 10.254.0.37, .17 cannot Ping.
>
>
> 10.1.0.17 can ping things in other Subnets, just not from Serial0 of
> the router Config below...
I don't see anything in your router config which would treat .17
differently from the other machines. You don't say where your servers
are but I think that's irrelevant. My diagnosis would be that the
default route on .17 is pooched - not there or the gateway address has
been entered wrongly.
Sam
Hansang Bae
> So I have three Server machines
> 10.1.0.10 Win2003 Server DC
> 10.1.0.17 Win2008 Server DC/File Server
> 10.1.0.19 Win2008 Server Hyper-V Server
>
> Nothing fancy on the servers.
>
> I can Ping all of them from the router's Ethernet Interface (on the
> same Subnet)
> If I ping using the Serial 0 as the source Address, I can only Ping .
> 10 and .19
>
> Same if I go from the servers to 10.254.0.37, .17 cannot Ping.
>
>
> 10.1.0.17 can ping things in other Subnets, just not from Serial0 of
> the router Config below...
>
[snip]
FW on the .17 server?
--
hsb
"Somehow I imagined this experience would be more rewarding" Calvin
********************************************************************
Due to the volume of email that I receive, I may not be able to
reply to emails sent to my account. Please post a followup instead.
********************************************************************