Cisco 2501, X.25 and RADIUS

[Dennis Peng]

The remote x25 address should be logged in the remote_addr field
in TACACS+, and the Caller-ID field in RADIUS in 11.1(5) or later
versions of software.

Dennis

>
> I have a 2501 connected to an x.25 line. The authentication is done via
> RADIUS to a radius server running Livinston radiusd. Is it possible to
> log the calling x.25 addresses of the calls that come in. As they are
> collect calls I would like to be able to log where they are comming from
> :) If I type 'who' on the Cisco the x.25 address af the call shows up
> under location. Is this information passed back to the RADIUS server for
> accounting? I am running IOS 10.2. If this is not possible with RADIUS,
> is it possible with TACACS+
>
> TIA,
> -Matt
>
> -------------------------------------------------------------------------------
> Matt Hamilton Clintondale Aviation
> ma...@clintondale.com http://www.clintondale.com
> -------------------------------------------------------------------------------
>

-------------------------------------------------------------------------
|| || Dennis Peng
|| || Cisco Systems, Inc. Customer Engineer
|||| |||| 170 West Tasman Drive Phone: (408) 526-6143
..:||||||:..:||||||:.. San Jose, CA 95134 Fax: (408) 526-8787
Cisco Systems Inc. dp...@cisco.com
-------------------------------------------------------------------------

[William Chops]

I have a 2501 connected to an x.25 line. The authentication is done via
RADIUS to a radius server running Livinston radiusd. Is it possible to log

the calling x.25 addresses of the calls that come in. I am running IOS

10.2. If this is not possible with RADIUS, is it possible with TACACS+

Um, if you are running 10.2, you aren't using radius (which is an 11.1
feature!) TACACS+ (10.3 and later) will put the remote x.25 address in the
"remote address" field of the TACACS packets. RADIUS will include it in
radius packets using the "calling-station-id" attribute in 11.1(5) and later.

BillW
cisco