Need info abt frame relay header

[gowda_...@yahoo.com]

Our test setup is as below :

1) For the MLFR side, Port 5 of Adtech(.153) was connected to Tigris
0/Evros 0.
2) For the FR side, Port 4 of Adtech(.153) was connected to Tigris
1/Evros 1.

Our Packet configuration :

1) IP over Frame Relay Traffic with channelised - DS3
configuration in the MLFR side with the following options set :
DLCI = 16
Flags : C/R, FECN, DE with various combinations
Control UI = 0x03
NLPID = 0xCC
along with IP Packet Format in different modes set:
1) User Mode
2) IP editable Test Blocks.

2) But we are not getting that packet out from FR side.

We thought of adding "fragmentation header" with the packet , we have
not seen any option for adding this.
Where can we get this option or any relevant information for the same.