SW and multiple cores

Jean Marc

unread,

Mar 4, 2008, 6:06:10 AM3/4/08

to

I know the subject has been beaten quite a bit...

Right now, I'm waiting for SW to let me work again. I see in the task
manager only one core (Core 2 6700) working 100%, the other idle. (assy and
drawing of the same)

While waiting, I am wondering if latest versions of SW (I'm on '06) make use
of multiple cores.

ChamberPot

unread,

Mar 4, 2008, 9:13:26 AM3/4/08

to

Ah, yes, this is why I love this place. Clueless fucks can say whatever
they like without any evidence whatsoever.

It really depends on the types of models you make. Drawings and
assemblies are becoming more mtil-threaded every release. I've heard one
of these people that Bangqueer quotes all the time say that surface
models and multibodies make good use of multiprocessors.

Daisy

--
Posted via a free Usenet account from http://www.teranews.com

jon_banquer

unread,

Mar 4, 2008, 10:22:07 AM3/4/08

to

> Ah, yes, this is why I love this place. Clueless fucks can say whatever
> they like without any evidence whatsoever.

Which is why you have to resort to posting with numerous aliases.

ROTFLMFAO

Jon Banquer
San Diego,CA

brew...@aol.com

unread,

Mar 4, 2008, 1:18:50 PM3/4/08

to

[
Franco Folini

UPDATE -- July 8, 2007 -- I had to close this blog post to further
comments and to remove the personal attacks between Jon and some other
newsgroups readers. Before the interview, I made an agreement with Jon
about the style of the interview and the way to handle it. Jon didn't
respect our agreement, posting comments under fake names. Jon's
authentic and fake comments are all posted from the same IP address,
72.199.251.224. I can now see that my trust in Jon was misplaced.
] http://blog.novedge.com/2007/07/an-interview-wi.html

Just some of the numerous bandqueer aliases;

larry...@yahoo.com
Topdownbydesign
OS Noir
Frank Booth, jr
dominantjon
Mr.X
jbtech
Clinton Upyers
Haywood Jablowme
Normand Blais
jonSeamlessUnif...@yahoo.com
jbt...@connix.com
myfirstan...@yahoo.com
joe...@yahoo.com
haywoodj...@yahoo.com
Brian Winters
Johnny Stevenson
Joe789
J0e788
Former Heavy Industries Employee
donl517
James Jessup
joema...@aol.com
Troll Killer
Mr. Stan Nowicki
heartb...@my-deja.com

jon_banquer

unread,

Mar 4, 2008, 6:33:52 PM3/4/08

to

> Franco Folini.

Is a CADCAM salesman. Imagine someone getting even with a CADCAM
salesman instead of being taken advantage of one. See your quotes
below that show how stupid you are, Brewer.

ROTFLMFAO

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.

Jon Banquer
San Diego, CA

Cliff

unread,

Mar 4, 2008, 6:38:49 PM3/4/08

to

"Please let me clarify that Jon is not affiliated with HSMWorks ApS in any way
and that we cannot control what people are writing on the web."
"Anybody can get evaluation licenses of HSMWorks and test it themselves."
"I hope this clarifies any doubt."
--
Cliff

Cliff

unread,

Mar 4, 2008, 6:40:52 PM3/4/08

to

On Tue, 4 Mar 2008 15:33:52 -0800 (PST), jon_banquer <jon_b...@yahoo.com>
wrote:

>> Franco Folini.

>
>Is a CADCAM salesman. Imagine someone getting even with a CADCAM
>salesman instead of being taken advantage of one.

So your lies were about sales?

"Please let me clarify that Jon is not affiliated with HSMWorks ApS in any way
and that we cannot control what people are writing on the web."
"Anybody can get evaluation licenses of HSMWorks and test it themselves."
"I hope this clarifies any doubt."

HTH
--
Cliff

jon_banquer

unread,

Mar 4, 2008, 6:39:49 PM3/4/08

to

> Franco Folini.

Was it a CADCAM salesmen like Folini who sold you Artisan, Brewer? I
got a free interview. You got taken for a costly ride. It wasn't the
first time, Brewer and it sure won't be the last time, sucker.

brew...@aol.com

unread,

Mar 4, 2008, 8:57:58 PM3/4/08

to

On Tue, 4 Mar 2008 15:33:52 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:

>> Franco Folini.
>
>Is a CADCAM salesman. Imagine someone getting even with a CADCAM
>salesman instead of being taken advantage of one. See your quotes
>below that show how stupid you are, Brewer.
>
>ROTFLMFAO

Jon,

So your now saying you broke your agreement with Folini to get even
with a CAD/CAM salesman? If it is now OK for you to lie because you
were "getting even" why did you originally deny you did it when you
got caught and it first came to light?

Now your excuse for lying and breaking your agreement with Folini
changes again Jon. You thus far give three excuses for lying after you
originally denied you posted fake comments under false names to the
public comments section on your interview in violation of your
agreement with Folini.

Since all three of your evolving excuses are different which one is
NOW the truth according to Jon Banquer?

Tom

jon_banquer

unread,

Mar 4, 2008, 9:08:07 PM3/4/08

to

> So your now saying...

That as per usual you got it wrong and that you're an idiot.

brew...@aol.com

unread,

Mar 4, 2008, 9:42:38 PM3/4/08

to

On Tue, 4 Mar 2008 15:39:49 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:

>Was it a CADCAM salesmen like Folini who sold you Artisan, Brewer?

Jon,

Folini treated you honestly and fairly Jon, his mistake was trusting
Jon Banquer to do the same.

Tom

gk

unread,

Mar 4, 2008, 10:08:00 PM3/4/08

to

Same old tired repeats from Jonnie. As all of the above are taken out
of context or are old news or both, don't you think you could do just a
little better, oh person of more aliases than most? You really are
pathetic most days, Jonnie no matter whom you are posting as that day.

gk

unread,

Mar 4, 2008, 10:11:02 PM3/4/08

to

jon_banquer wrote:

And here's our Jonnie at his best:

On Sat, 15 Dec 2007 10:50:53 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:

>>Ignorant:

"You don't love what your crack whore mother does to you? Does it have
something to do with how much your father laughs at you while your
bent over taking it in the ass? Being on your knees taking it in the
ass is your natural position. Suggest you be proud of who you and your
mother are." -Jon Banquer-

"You back up when your crack whore mother fucks you in the ass with
here strap-on." - Jon Banquer-

"Speaking of sharing. Your father shares your crack whore mother with
anyone who has $5." -Jon Banquer -

"How about using your crack whore mother? Everyone else does." -Jon
Banquer-

"I OWN you! You ain't worth much but I make the most of your worthless
ass. Now get back on your knees you dumb cunt." -Jon Banquer -

"Suggest you shut the fuck up already and take what your crack whore
mother is giving you without squealing like a little pig. You're my
bitch and I own you. Suggest you accept reality for once and deal with
it." -Jon Banquer-

"Has something to do with being born to a crack whore mother and
having no idea who his daddy really is. At least he knows he's my
bitch and I enjoy using him on a daily
basis." -Jon Banquer -

"inches of strap-on dildo that your crack whore mother shoved up your
ass as you begged you father to tell her to stop." -Jon Banquer-

"The only thing bottom of the barrel is where these motherfuckers will
be found by the time I'm done fucking with them." -Jon Banquer-

"Figure it out for yourself or have your worthless crack whore mother
explain it to you while your father is pimping her out to John
Carroll." - Jon Banquer-

"Here is your "apology": Fuck off and die you worthless, lying fucking
drunk." -Jon Banquer-

"Yeah, I'll get right on spending my time educating a dumb mother
fucker like you right away. You will get what I choose to give you
when I choose to give it to you, bitch. -Jon Banquer-

"You really need to stop sucking dick Numb Nutz. Seriously you're a
major loser" Jon Banquer

"Your crack whore mother going down on anyone who might give her $5"
-Jon Banquer-

"Let me explain what humiliation is to you since you're so fucking
stupid that you have no clue what humiliation really is. Humiliation
is you being sodomized by your mother wearing a strap-on.
Did your father suck off your mother's strap-on before she sodomized
you?" - Jon Banquer-

"Now do what you do best and go back to playing with your nuts, son."
- Jon Banquer

"Seems like you wanna talk about you crack addicted whore of a mother
who fucks you in the ass with her strap-on instead." -Jon Banquer-

"I'm sure your crack addicted whore mother always tells you she loves
you when you're bent over and hiding your face in shame in the corner.
Do you tell her how successful you are and how many seats Mastercam
has sold? Do you think she cares? Is this the reason you now prefer
men? " -Jon Banquer-

"WWWWWWWWWWWWWWWAAAAAAAAAAAAAAaaaaaaaaaaaaaaa... the sound you make
when your cracked addicted whore mother rapes you over and over and
over again." -Jon Banquer-

"Are you happy with the position your crack addicted whore mother puts
you in when she fucks you in the ass with her strap-on? You like being
bent over and taking it in the ass don't you? " -Jon Banquer-

"Why? You prefer men. The only exception you make is for your crack
addicted whore of a mother. " -Jon Banquer-

"Squeal like the raped little bitch your crack addicted whore mother
turned you into. It's so you! " -Jon Banquer-

"Your crack addicted whore mother cums hard when she has you in the
position she loves you to be in... on your knees in a corner squealing
like the lying little pig that you are. " -Jon Banquer-

"I feel sorry for your mother or whatever you call that crack whore
that spit you out." -Jon Banquer-

"Your mother does anyone. That's what happens when you're a crack
whore. Proud of her are you?" -Jon Banquer -

"You have every right to be proud of your crack whore mother. Look how
long she's been in business."-Jon Banquer-

"Of course that pails in comparison to your crack whore mother who is
still open for business 24/7/365. " - Jon Banquer -

Now, we are all reminded again just what a sweetheart Jonnie can be.

gk

unread,

Mar 4, 2008, 10:14:02 PM3/4/08

to

jon_banquer wrote:

The only one around here that continually "gets is wrong" is you Jonnie.

Here are some more quotes from Wonder Boy:

On Wed, 19 Dec 2007 20:02:08 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:>

>>
>>BTW, fuck Bill Gibbs.
>>What the fuck does this mean?
>>Fuck off and die, Gary.
>>You can both go fuck yourselves.
>>Fuck off and die Numb Nutz Putz
>>no one gives a fuck
>>Fuck off and die you lying sodomized little bitch.
>>I wish to fuck with idiots.
>>Fuck consensus and fuck you.
>>It's put up or shut the fuck up time shitbag.
>>You're under the mistaken impression that I give a fuck
>>Fuck off and die with your whining bullshit asshole.
>>don't give a fuck about doing the right thing
>>Suggest you fuck off and die, asshole.
>>Time to grow the fuck up.
>>I'd rather tell you to go fuck yourself.
>>might wake the fuck up and fire the slimy little bitch
>>fuck Peter Smid, fuck copyright law, etc.
>>max you right the fuck out.
>>I don't and I doubt whether anyone gives a fuck.
>>not give a fuck if he's attacked
>>Fuck Ben Halpin, fuck Lemon Grove and fuck you.
>>waking the fuck up.
>>not giving a fuck
>>fuck about CADCAM
>>Steve and SVL don't really give a fuck about CADCAM
>>Fuck that asshole and fuck you
>>Fuck no.
>>why not fuck off and die.
>>What the fuck is wrong with you Bob?
>>no one gives a fuck about
>>Just another topic I don't give a fuck about
>>American Machinist couldn't give a fuck about true machining
>>don't give a fuck about what their users / potential users really want.
>>One other problem that annoys the fuck out of us:
>>I don't give a fuck what you would like
>>Your worthless, lying fucking piece of shit.
>>Where the fuck do you get off?
>>How the fuck would I know if it changes the original numbers.
>>can go fuck himself with his
>>full of shit once again
>>Your so fucking stupid
>>how little you fucking know and understand.
>>are also too fucking stupid to understand
>>is also too fucking stupid to know
>>You have no fucking clues.
>>too fucking stupid and lazy to even do that.
>>Give me a fucking break.
>>think everyone is as fucking stupid as you
>>Too bad you're too fucking brain dead

>>you're so fucking stupid that you have no clue

>>CADCAM fucking sucks
>>Lathe is a fucking joke
>>what's the fucking problem?
>>you being objective is a fucking joke.
>>you being objective is pretty fucking funny to me, Bob
>>Good fucking luck
>>get a fucking life

Jonnie just gets better and better.

gk

brew...@aol.com

unread,

Mar 4, 2008, 10:20:31 PM3/4/08

to

On Tue, 4 Mar 2008 18:08:07 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:

>
>> So your now saying...
>
>That as per usual you got it wrong and that you're an idiot.

Got it wrong eh!

First you said you broke your agreement with the author because:

1) it would waste massive amounts of your time to post as yourself.

Then you changed your reason for breaking your agreement with the
author to:

2) give posters a taste of their own medicine.

Then now here you are saying you broke your agreement with the author
to:

3) get even with a CAD/DAM salesman.

***********************
[
http://blog.novedge.com/2007/07/an-interview-wi.html

Jon didn't respect our agreement, posting comments under fake
names. Jon's authentic and fake comments are all posted from the same

IP address, <snipped IP Address> I can now see that my trust in Jon
was misplaced.
] -Frank Folini-

**************************

Then when you got caught Jon and exposed for violating your agreement
with the author you couldn't keep your excuses straight:

(Excuse #1)

[
"Why not just use your real name instead of stooping to their level?"

Because it can't be done without wasting massive amounts of my time!
]
-Jon Banquer on Jul 9 2007

Then you said:

(Excuse #2)

[
I figured for once I'd give these posters a taste or their own
medicine which seemed to anger the host of the Blog who had elected to
go with an unmoderated format.
]
-Jon Banquer- July 18, 2007-

(Excuse #3)

[

Imagine someone getting even with a CADCAM salesman

]
-Jon Banquer - March 4, 2008

So Jon, out of your three separate and distinctly different excuses,
which one is the truth?

Tom

jon_banquer

unread,

Mar 4, 2008, 10:35:49 PM3/4/08

to

> Folini treated you honestly

How do you know this, Brewer? You have no idea what went down between
Folini and myself. What we do know is your track record shows you to
be a complete idiot.

jon_banquer

unread,

Mar 4, 2008, 10:38:27 PM3/4/08

to

> Got it wrong eh!

You get lots of stuff wrong, Brewer. See below.

jon_banquer

unread,

Mar 4, 2008, 10:41:09 PM3/4/08

to

> Jonnie just gets better and better.

Unlike you who stays the same Nuts son. 10 years of almost totally
useless posts to Usenet with nothing to say. In fact almost all of
your posts are responses to mine because you have so little to say.
Your a loser Nuts son.

Jon Banquer
San Diego,CA

jon_banquer

unread,

Mar 4, 2008, 10:44:44 PM3/4/08

to

> The only one around here that continually "gets is wrong" is me.

Now it's correct, Nuts son.

Jon Banquer
San Diego,CA

brew...@aol.com

unread,

Mar 5, 2008, 12:16:11 AM3/5/08

to

On Tue, 4 Mar 2008 19:35:49 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:

>> Folini treated you honestly
>
>How do you know this, Brewer? You have no idea what went down between
>Folini and myself.

Jon,

So now some 6+ months down the road, you JUST NOW are implying that
Folini has not been honest in his dealings with you?

If it is true why are you just now bringing it up?

Me thinks you are being disingenuous.....as usual....there Mr.
Jon-the-donk.

Tom

brew...@aol.com

unread,

Mar 5, 2008, 12:26:30 AM3/5/08

to

On Tue, 4 Mar 2008 19:38:27 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:

>> Got it wrong eh!
>
>You get lots of stuff wrong

Jon,

I did give three separate quotes of yours where you give conflicting
reasons why you broke your agreement with the author.

If I got it wrong please explain out of the three reasons you gave,
which one is the truth.

Tom

jon_banquer

unread,

Mar 5, 2008, 12:52:50 AM3/5/08

to

> So now some 6+ months down the road, you JUST NOW are implying that
> Folini has not been honest in his dealings with you?

Only an idiot like you, Brewer would not see Folini for what he is...
a cadcam salesman.

Only and idiot like you, Brewer failed to notice that Folini claimed
Italians make the most powerful racing engines and my response to his
rubbish.

Face it Brewer, you're a clueless Usenet stalker who makes tons of
mistakes. Get a life asshole. It's not my job to educate a dumb ass
like you or even get you up to speed.

madcadman

unread,

Mar 5, 2008, 1:00:01 AM3/5/08

to

jon bonquer = excrement chomper

"jon_banquer" <jon_b...@yahoo.com> wrote in message
news:f0659e97-d6d6-45b4...@e10g2000prf.googlegroups.com...

jon_banquer

unread,

Mar 5, 2008, 1:11:21 AM3/5/08

to

> Madcowman = excrement chomper

Now it's correct Madcowman.

Jon Banquer
San Diego,CA

brew...@aol.com

unread,

Mar 5, 2008, 1:42:40 AM3/5/08

to

On Tue, 4 Mar 2008 21:52:50 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:

>> So now some 6+ months down the road, you JUST NOW are implying that
>> Folini has not been honest in his dealings with you?
>
>Only an idiot like you, Brewer would not see Folini for what he is...
>a cadcam salesman.

So Jon, you didn't know what Folini was before you made your agreement
and he posted your comments on his blog?

In your book Jon its OK to make an agreement and then promptly break
that agreement once you get what so long as its a salesman you lied
to?

Tom

brew...@aol.com

unread,

Mar 5, 2008, 1:47:12 AM3/5/08

to

you want

brew...@aol.com

unread,

Mar 5, 2008, 1:43:44 AM3/5/08

to

On Tue, 4 Mar 2008 21:52:50 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:

>Only and idiot like you, Brewer failed to notice that Folini claimed
>Italians make the most powerful racing engines and my response to his
>rubbish.

Who gives a shit Jon, what does this have to do with your lying to the
man and then lying repeatedly about why you did it?

Tom

Cliff

unread,

Mar 5, 2008, 6:48:23 AM3/5/08

to

I may have tried to warn him <shrug>.

"Please let me clarify that Jon is not affiliated with HSMWorks ApS in any way
and that we cannot control what people are writing on the web."
"Anybody can get evaluation licenses of HSMWorks and test it themselves."
"I hope this clarifies any doubt."

"I can't even mention HSMWorks without them getting complaints about me." -
Feb 22 2008 by jon banquer
--
Cliff

Cliff

unread,

Mar 5, 2008, 7:20:50 AM3/5/08

to

On Tue, 4 Mar 2008 18:08:07 -0800 (PST), jon_banquer <jon_b...@yahoo.com>
wrote:

>

>> So your now saying...
>
>That as per usual you got it wrong and that you're an idiot.

So when Franco traced the IP numbers to you ....
--
Cliff

Cliff

unread,

Mar 5, 2008, 7:20:49 AM3/5/08

to

On Tue, 04 Mar 2008 17:57:58 -0800, brew...@aol.com wrote:

>On Tue, 4 Mar 2008 15:33:52 -0800 (PST), jon_banquer
><jon_b...@yahoo.com> wrote:
>
>>> Franco Folini.
>>
>>Is a CADCAM salesman. Imagine someone getting even with a CADCAM
>>salesman instead of being taken advantage of one. See your quotes
>>below that show how stupid you are, Brewer.
>>
>>ROTFLMFAO
>
>Jon,
>
>So your now saying you broke your agreement with Folini to get even
>with a CAD/CAM salesman?

Poor clueless seems utterly clueless even as to what they actually do
& sell as well as their business model.

BTW, Perhaps he's annoyed that Franco has a degree in IT while
clueless got kicked out of HS with not even a drop of shop math.
Anybody else wonder what he actually took in that claimed HS?
Perhaps he majored in Drivers Ed. One would think that if he
took it 3 oor four times he might at last pass & learn how to drive
(without hitting pedestrians or using stolen cars).
OTOH Perhaps he's not to drive at all with the Lithium & stuff.
--
Cliff

Cliff

unread,

Mar 5, 2008, 7:20:51 AM3/5/08

to

On Tue, 4 Mar 2008 19:41:09 -0800 (PST), jon_banquer <jon_b...@yahoo.com>
wrote:

>> Jonnie just gets better and better.

Usefull words of machining & CAD wisdom from clueless:
[

]
[

]

HTH
--
Cliff

Cliff

unread,

Mar 5, 2008, 7:20:56 AM3/5/08

to

Pretty simple: He lied three times.
--
Cliff

Cliff

unread,

Mar 5, 2008, 7:20:57 AM3/5/08

to

On Tue, 4 Mar 2008 19:38:27 -0800 (PST), jon_banquer <jon_b...@yahoo.com>
wrote:

>Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is

>someone who knows more and more about less and less until he knows
>absolutely everything about nothing.

YOU don't seem to know much of anything about SolidWorks.
16 hours of claimed intro training videos (still watching them?)
and you are stil utterly clueless per all the bad & misinformed
"advice" (buzzwords you heard on the videos?) you spouted
(and actual users caught you on).
But then, as usual, you shut up as you could not put up
(and we all know it). Your standard MO with your BS & tripe.
You'd not even be able to model a simple Cranfield Object
with hand holding.
--
Cliff

madcadman

unread,

Mar 5, 2008, 8:34:55 AM3/5/08

to

jon bongqueer = psychotic cadcam buzzword loser

"Cliff" <Clhu...@aol.com> wrote in message
news:gj3ts3taum222fch3...@4ax.com...

jon_banquer

unread,

Mar 5, 2008, 9:13:16 AM3/5/08

to

On Mar 5, 5:34 am, "madcadman" <m...@cadman-nospam.com> wrote:
> Madcowman = Yet another Usenet pussy too afraid to post with his real name and location.

Now it's correct Madcowman

jon_banquer

unread,

Mar 5, 2008, 9:21:40 AM3/5/08

to

> So Jon, you didn't know what Folini was before you made your agreement
> and he posted your comments on his blog?

It's called an interview, Brewer. An interview is something no one has
ever been interested in doing with you, Brewer because you have
absolutely nothing to say in regards to CADCAM. Perhaps one day
someone will want to interview an idiot like you who makes tons of
mistakes and has no innovative ideas. In that case you would be on the
top of the list along with your mentor Cliff Huprich who has never
even used SolidWorks, is totally unemployable and couldn't machine his
way out of a paper bag.

Hope this helps,

jon_banquer

unread,

Mar 5, 2008, 9:23:29 AM3/5/08

to

> Who gives a shit Jon...

No one gives a shit about what your stalking nonsense and your lies,
Brewer. Same goes with you mentor Cliff Huprich.

Hope this helps,

gk

unread,

Mar 5, 2008, 11:51:02 AM3/5/08

to

I believe that you also fit this same MO then Jonnie, as you continually
lie about your real location (and post with numerous aliases).

These are yours, aren't they?

larryro...@yahoo.com
Topdownbydesign
OS Noir
Frank Booth, jr
dominantjon
Mr.X
jbtech
Clinton Upyers
Haywood Jablowme
Normand Blais
jonSeamlessUnifiedHybridbanq...@yahoo.com
jbt...@connix.com
jon banquer myfirstandlastn...@yahoo.com
joe0...@yahoo.com
haywoodjablow...@yahoo.com
Brian Winters
Johnny Stevenson
Joe789
J0e788
Former Heavy Industries Employee
donl517
James Jessup
joemama...@aol.com
Troll Killer

Not bad for the pussy your are Jonnie!

gk

Cliff

unread,

Mar 5, 2008, 12:19:40 PM3/5/08

to

On Tue, 4 Mar 2008 07:22:07 -0800 (PST), jon_banquer <jon_b...@yahoo.com>
wrote:

>> Ah, yes, this is why I love this place. Clueless fucks can say whatever
>> they like without any evidence whatsoever.
>
>Which is why you have to resort to posting with numerous aliases.
>
>ROTFLMFAO
>
>Jon Banquer
>San Diego,CA

Partial list of jb's clueless aliases (may have duplicates):
[

Topdownbydesign
OS Noir
Frank Booth, jr
dominantjon

John-Who ?
jonSeamlessUnifiedHybridbanq...@yahoo.com
Mr.X
jbtech
Clinton Upyers ?
Haywood Jablowme
larry...@yahoo.com
Normand Blais
jonSeamlessUnif...@yahoo.com
jbt...@connix.com
jon banquer myfirstan...@yahoo.com
joe...@yahoo.com
larryro...@yahoo.com
larry...@yahoo.com

Topdownbydesign
OS Noir
Frank Booth, jr
dominantjon
Mr.X
jbtech
Clinton Upyers
Haywood Jablowme
Normand Blais
jonSeamlessUnifiedHybridbanq...@yahoo.com
jbt...@connix.com
jon banquer myfirstandlastn...@yahoo.com

haywoodjablow...@yahoo.com
Brian Winters
donl517
Johnny Stevenson
joe0...@yahoo.com
Joe789
J0e788

larryro...@yahoo.com
Topdownbydesign
OS Noir
Frank Booth, jr
dominantjon
Mr.X
jbtech
Clinton Upyers
Haywood Jablowme
Normand Blais
jonSeamlessUnifiedHybridbanq...@yahoo.com
jbt...@connix.com
jon banquer myfirstandlastn...@yahoo.com
joe0...@yahoo.com
haywoodjablow...@yahoo.com
Brian Winters
Johnny Stevenson
Joe789
J0e788
Former Heavy Industries Employee
donl517
James Jessup
joemama...@aol.com
Troll Killer

Former Heavy Industries Employee
]

HTH
--
Cliff

Cliff

unread,

Mar 5, 2008, 12:37:23 PM3/5/08

to

gk,
It's actually "Jonathan".
He even likes to lie about that.
The better searches use "Jonathan" <G>.
--
Cliff

Cliff

unread,

Mar 5, 2008, 12:51:12 PM3/5/08

to

On Wed, 5 Mar 2008 06:21:40 -0800 (PST), jon_banquer <jon_b...@yahoo.com>
wrote:

>> So Jon, you didn't know what Folini was before you made your agreement

>> and he posted your comments on his blog?
>
>It's called an interview, Brewer. An interview is something no one has
>ever been interested in doing with you, Brewer because you have
>absolutely nothing to say in regards to CADCAM.

Unlike a clueless & confused BS artist full of buzzword hype from
ads for things he's never ever used Tom actually uses software.

>Perhaps one day
>someone will want to interview an idiot like you who makes tons of
>mistakes and has no innovative ideas.

Which of the voices said that? LOL .... you are well known among
most vendors & developers for stupidity & cluelessness.
The rest catch on too.

>In that case you would be on the
>top of the list along with your mentor Cliff Huprich who has never
>even used SolidWorks,

Is it a full CAD/CAM system?

>is totally unemployable

Got fired again, eh? Two weeks this time? One? Two days?
Not even one day?

>and couldn't machine his
>way out of a paper bag.

And you got those Aluminum blocks how precise with a flycutter
on a standard manual BP? At what temp?
And had to leave that job in a hurry a few days later ... LOL ....

You'd have problems with two holes in a bit of cold rolled, no
matter how long you kept "editing" the "program".

>Hope this helps,

<Snicker>.

Why don't you ever post about machining (beyond "double drilling 'cause
the holes were wrong" & "I dull my shop's $$$ reamers with a diamond hone")?
Or get ANYTHING right ever (on your own) about CAD? Or have a clue
what CAD/CAM is?

BTW, Edited g-code is not associative to the CAD or CAD/CAM models
no matter how much you edit it to correct your simple 2 1/2 axes blunders.

>Jon Banquer
>San Diego, CA

Rotten gave you the heave how long ago?
--
Cliff

Cliff

unread,

Mar 5, 2008, 12:54:54 PM3/5/08

to

On Wed, 5 Mar 2008 06:23:29 -0800 (PST), jon_banquer <jon_b...@yahoo.com>
wrote:

On Tue, 04 Mar 2008 22:43:44 -0800, brew...@aol.com wrote:

>
>On Tue, 4 Mar 2008 21:52:50 -0800 (PST), jon_banquer
><jon_b...@yahoo.com> wrote:
>
>>Only and idiot like you, Brewer failed to notice that Folini claimed
>>Italians make the most powerful racing engines and my response to his
>>rubbish.

>> Who gives a shit Jon...

>
>No one gives a shit about what your stalking nonsense and your lies,
>Brewer. Same goes with you mentor Cliff Huprich.

>> what does this have to do with your lying to the

>> man and then lying repeatedly about why you did it?

>Hope this helps,

It looks better now <VBG>.
--
Cliff

brew...@aol.com

unread,

Mar 5, 2008, 1:30:04 PM3/5/08

to

On Wed, 5 Mar 2008 06:21:40 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:

>> So Jon, you didn't know what Folini was before you made your agreement
>> and he posted your comments on his blog?
>
>It's called an interview,

Jon,

So now your saying when someone promises to "interview" you and posts
your comments to his blog you don't have to be honest and keep your
promises dealing with him?

Where exactly did this "interview" take place, where did you guys
meet? Oh! that's right you didn't.

So did he send you questions via email and you responded in kind and
he then posted your comments to his blog? Would have been funnier if
he didn't let you use your crib notes.

Tom

brew...@aol.com

unread,

Mar 5, 2008, 1:34:52 PM3/5/08

to

What lies Jon? I keep asking you to prove your accusation by posting
specific examples but you haven't been able to.

The only person proven to lie is you Jon.

Tom

jon_banquer

unread,

Mar 5, 2008, 9:34:22 PM3/5/08

to

> Jon,
>
> So now your saying when someone promises to "interview" you and posts
> your comments to his blog you don't have to be honest and keep your
> promises dealing with him?

Nope never said that, Brewer. It's just you using your propaganda
tactics again.

Nice try asshole but no cigar.

> Where exactly did this "interview" take place, where did you guys
> meet? Oh! that's right you didn't.

Once again a propaganda tactic, Brewer. You attempt to define
"interview" as something that can only happen face to face. Sorry
asshole and interview can be done by e-mail, on the phone, etc.

Nice try asshole but no cigar.

> So did he send you questions via email and you responded in kind and
> he then posted your comments to his blog?

I don't have any intention of providing you with this information. I
don't go out of my way to help liars like you, Brewer.

>Would have been funnier if he didn't let you use your crib notes.

Would have been funnier if he interviewed you on what it's like to be
dumb / stupid / ignorant when it comes to CADCAM.

See your quotes below moron for some clues:

Ignorant:

Conclusion:

jon_banquer

unread,

Mar 5, 2008, 9:35:40 PM3/5/08

to

> The only person proven to lie is me and my pals.
>
> Tom

Now it's correct, Brewer.

Jon Banquer
San Diego,CA

jon_banquer

unread,

Mar 5, 2008, 9:38:11 PM3/5/08

to

> I believe that I fit this same MO then, as I continually
> lie.

> Not bad for the pussy I am, Jon.
>
> gk

Now it's correct, Nuts son.

gk

unread,

Mar 5, 2008, 10:07:40 PM3/5/08

to

More quotes from our friend Jonnie:

Jon commenting on his childhood:

"Let me explain what humiliation is to you since you're so fucking
stupid that you have no clue what humiliation really is. Humiliation
is you being sodomized by your mother wearing a strap-on.
Did your father suck off your mother's strap-on before she sodomized
you?" - Jon Banquer-

Jon saying good night to his mom:

"Fuck off and die you worthless, lying fucking drunk." -Jon Banquer-

Jon having sex:

"Squeal like the raped little bitch your crack addicted whore mother

turned you into." -Jon Banquer-

Jon with his kids:

"You really need to stop sucking dick Numb Nutz. Seriously you're a
major loser" Jon Banquer

"Now do what you do best and go back to playing with your nuts, son."
- Jon Banquer

"Your mother does anyone. That's what happens when you're a crack

whore. Proud of her are you?" -Jon Banquer -

Jon on education:

" I dropped out of high school to pursue my dream of making a lot of
money and never went back" - Jon Banquer -

Jon home schooling his kids:

"Figure it out for yourself or have your worthless crack whore mother

explain it to you while your father is pimping her out" - Jon Banquer-

"Yeah, I'll get right on spending my time educating a dumb mother
fucker like you right away. You will get what I choose to give you
when I choose to give it to you, bitch. -Jon Banquer-

He never gets any better, either.

gk

madcadman

unread,

Mar 5, 2008, 10:42:57 PM3/5/08

to

>> Who gives a shit Jon...
>

Jon does. He saves it in a bottle and then eats it later for dinner.

brew...@aol.com

unread,

Mar 5, 2008, 10:47:57 PM3/5/08

to

On Wed, 5 Mar 2008 18:34:22 -0800 (PST), jon_banquer
<jon_b...@yahoo.com> wrote:

>> Jon,
>>
>> So now your saying when someone promises to "interview" you and posts
>> your comments to his blog you don't have to be honest and keep your
>> promises dealing with him?
>
>Nope never said that, Brewer. It's just you using your propaganda
>tactics again.
>
>Nice try asshole but no cigar.

Just trying to keep up with you changing your reasons for breaking
your agreement with Folini and your subsequent lies & excuses for
doing so.

>
>> Where exactly did this "interview" take place, where did you guys
>> meet? Oh! that's right you didn't.
>
>Once again a propaganda tactic, Brewer. You attempt to define
>"interview" as something that can only happen face to face.

Well I did say he posted your "comments" to his blog. You then
followed it up with it being an "interview" so that imply's you were
"interviewed".

>Sorry
>asshole and interview can be done by e-mail, on the phone, etc.

Well an "interview" imply's being "live" where questions are posed and
follow up questions are asked and based upon your responses. So in
person, via closed circuit TV or over the phone etc. would apply.

>Nice try asshole but no cigar.
>
>> So did he send you questions via email and you responded in kind and
>> he then posted your comments to his blog?
>
>I don't have any intention of providing you with this information. I
>don't go out of my way to help liars like you, Brewer.

EXACTLY what lies Jon?

Now we both know your "interview" was NOT in real time (live), that's
why you just avoided directly answering the above question. Because
you don't want people to know that it was not an "interview" in the
traditional sense.

So tell us Jon, did your "interview" take place via email where Folini
sent you questions and allowed you to take your time and then he just
took your comments and posted them to his blog?

>>Would have been funnier if he didn't let you use your crib notes.
>
>Would have been funnier if he interviewed you on what it's like to be
>dumb / stupid / ignorant when it comes to CADCAM.
>
>See your quotes below moron for some clues:

"Try a doughnut with you pathetic whining you obnoxious stupid little
cunt" - Jon Banquer

"And to think I owned 2 Honda Civics. By any chance did you start
banging Joe788's crack whore mother?"-Jon Banquer-

"Your right gk....LOL can I suck your dick now." -Jon Banquer-

"It fits tighter than a nuns cunt." -Jon Banquer-

"My mother is a crack whore" -Jon Banquer-

"What an inconsiderate cunt that little stalker bitch is." -Jon
Banquer-

"Fuck off and die asshole."-Jon Banquer-

"Get use to being owned, bitch."-Jon Banquer-

"How many more dicks will you be begging to suck?" -Jon Banquer-

> Merry Christmas to everybody!

"Jam it up your ass, Looghe. Not everyone is Christian and not
everybody wants to be a Christian Numb Nutz Putz. Suggest you go back
to sodomizing dairy cows, Pete."-Jon Banquer -

> You don't have to be a Christian to have a nice day do you?

"Shove your double standards up your fucking ass, It's would be better
if you died... soon." -Jon Banquer-

"If someone doesn't understand where I'm coming from by now (you for
instance) they can go fuck themselves as well." - Jon Banquer - Chula
Vista

"suggest you get back on your knees where a lying cunt like you
belongs." -Jon Banquer-

"How much money do you OWE not including your outstanding tab with
your
crack whore mother?"-Jon Banquer-

"You don't love what your crack whore mother does to you? Does it have
something to do with how much your father laughs at you while your
bent over taking it in the ass? Being on your knees taking it in the
ass is your natural position. Suggest you be proud of who you and your
mother are." -Jon Banquer-

" I backup what I post on a daily basis. You back up when your crack

whore mother fucks you in the ass with here strap-on." - Jon Banquer-