This is from the log.
Starting Windows patch.
The current date is: Thu 08/08/1996
Enter the new date: (dd-mm-yy)
The current time is: 21:52:46.65
Enter the new time:
Copying/patching Windows file #1 of 6 from disk #1
.\patch . 4_4NGUW.RTP
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
PATCH Version 2.12 - .RTPatch(R) Professional - Software Update
System
DOS and Windows Edition
(C) Copyright Pocket Soft, Inc., 1991-1994. All Rights Reserved.
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
ДДДДД Processing Patch File ДДДДД
Applying MODIFY File Patch for 'ADS\WINADS.LIB'
Warning wpt0036: Old File not found. However, a file of the same
name was found. No update done since file contents do not match.
Applying MODIFY File Patch for 'PHL_HUSK.DLL'
Writing New File
Verifying - Passed!
Deleting Old File
ДДДДД Patch File Processing Complete ДДДДД
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
- Results of Application of Patch File -
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
File Patches Applied ......................... ( 1)
Files Modified .................. ( 1)
Files Renamed. .................. ( 0)
Files Added ..................... ( 0)
Files Deleted ................... ( 0)
Temporary Files Processed........ ( 0)
File Patches Skipped: New Files Up-To-Date.... ( 0)
File Patches Ignored: Old Files Missing....... ( 0)
Old Files Invalid....... ( 1)
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
Total File Patches Processed ................. ( 2)
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД
Thanks for any help.
--
Lorne Tontegode
Ideas in Motion
id...@interlog.com
http://www.interlog.com/~ideas
-Graphic and Mechanical Design-
You have not mentioned the release of AutoCAD like R12 or R13. So I am not sure whether you
tried the latest R13c4a patch on R12c4 Windows.What type of installation did you have.
Is it locked version or unlocked version of AutoCAD. Did you do a Harddisk pathc installtion
or through floppies. Can you clarify. This error will not give problems.
G.Rajesh
//Autodesk Product Support on the Internet//
It was a patch of R13 C4 unlocked to R13 C4a unlocked. I run Windows NT
3.51 SP4 and there was around 150 MBs free at the time of patching. I
followed the instructions in the readme file for an unlocked patch from
the hard disk.
All other files patched without problems. This is the only part of the
log that showed a problem.
Warning wpt0036: Old File not found. However, a file of the same name
was
found. No update done since file contents do not match.
Applying MODIFY File Patch for 'SUPPORT\DDINSERT.LSP'
Warning wpt0036: Old File not found. However, a file of the same name
was
found. No update done since file contents do not match.
Applying MODIFY File Patch for 'SUPPORT\DDRENAME.LSP'
Warning wpt0036: Old File not found. However, a file of the same name
was
found. No update done since file contents do not match.
since patching neither ddinsert and ddrename or ddmoddify work. I firmly
believe Autodesk shoul have bypassed R13 and gone straight to R14. I hope
R14 will be a free (of bugs as well), to make up for a very poor unstable
product release (r13c1-4a). I followed the instructions in the readme
file for the locked patch from the hard disk.
All other files patched without problems. This is the only part of the
log that showed a problem.
--
--
Dean Bloomer - DCB Contracting P/L email - d...@ludin.com.au
Kalgoorlie Down Under Gold Mining Capital of the World
'Reality is just an illusion caused by the lack of alcohol.'