Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

PC-104 Development System

1 view
Skip to first unread message

Michael Frank

unread,
Oct 27, 2000, 11:06:00 AM10/27/00
to
Hello,

I'm looking into developing a system using the PC-104 bus. The system will
consist of a CAN controller, '1553 controller, A/D card, and a Solid State
Disk. Give or take.
I would prefer Mil grade parts, but I can qualify/modify Industrial grade to
work.
I am also interested to know what are the most common development
environments for pc-104 systems?

Thanks,

Mike


Russ.Shaw

unread,
Oct 27, 2000, 8:41:44 PM10/27/00
to
www.pc104.org, www.pc104.com

--
*******************************************
* Russell Shaw, B.Eng, M.Eng(Research) *
* email: rus...@webaxs.net *
* Victoria, Australia *
*******************************************


Eric Metheny

unread,
Oct 30, 2000, 9:23:30 AM10/30/00
to
Here is a good source for PC-104. http://www.pc104.com/
I have used WinSystems in the past which has industrial spec boards. I am
not aware of mil spec pc\104, but would bet that there is somebody out there
at least willing to qualify.

As far as CAN, check these people out: http://www.dgtech.com/ They appear
to be a leader in the industry.

Michael Frank wrote in message ...

Eric Metheny

unread,
Oct 30, 2000, 9:31:47 AM10/30/00
to
Just after writing, I found this.

http://www.ednmag.com/ednmag/reg/2000/10262000/pdfs/22cs.pdf

Regards,

Eric Metheny

Michael Frank wrote in message ...

0 new messages