Re: CCS v5 Error

[Tim Wescott]

On Tue, 11 Dec 2012 10:41:41 -0600, leomhb wrote:

> Dear Folks,
>
> I am working with Code Composer Studio v5 and TMS320F2812. I am facing
> with the following errors, even for Hello World sample program.
>
> Thanks,
> Amir
>
> .................
>
> **** Build of configuration Release for project ssr ****
>
> C:\Program Files (x86)\TI\ccsv5\utils\bin\gmake -k all 'Building target:
> ssr.out'
> 'Invoking: C2000 Linker'
> "C:/Program Files (x86)/TI/ccsv5/tools/compiler/c2000_6.1.0/bin/cl2000"
> -v28 -ml -mt -O2 --diag_warning=225 --display_error_number
> --diag_wrap=off -z -m"ssr.map" --warn_sections -i"C:/Program Files
> (x86)/TI/ccsv5/tools/compiler/c2000_6.1.0/lib" -i"C:/Program Files
> (x86)/TI/ccsv5/tools/compiler/c2000_6.1.0/include" --reread_libs
> --display_error_number --diag_wrap=off --rom_model -o "ssr.out"
> "./hello.obj" -l"libc.a" "../2812_RAM_lnk.cmd"
> <Linking>
> warning #10247-D: creating output section ".cio" without a SECTIONS
> specification warning #10247-D: creating output section ".sysmem"
> without a SECTIONS specification warning #10210-D: creating ".stack"
> section with default size of 0x400; use the -stack option to change the
> default size warning #10210-D: creating ".sysmem" section with default
> size of 0x400; use the -heap option to change the default size
> "../2812_RAM_lnk.cmd", line 86: error #10099-D: program will not fit
> into available memory. placement with alignment/blocking fails for
> section ".text" size 0x17ff page 0. Available memory ranges:
> PRAMH0 size: 0xffe unused: 0xf89 max hole: 0xf89
>
> error #10010: errors encountered during linking; "ssr.out" not built
>
>>> Compilation failure
> gmake: *** [ssr.out] Error 1 gmake: Target `all' not remade because of
> errors.
>
> **** Build Finished ****

I am taking the liberty to cross-post this to comp.arch.embedded, because
it's more of an embedded programming issue than a digital signal
processing issue.

It's been a long long time since I've used Code Composter, but it appears
that your linker command file is not covering all the bases as far as
specifying all of the sections. Either you need to call more than one
command file, or your 2812_RAM_lnk.cmd is not correct for the files that
you are trying to link.

My suggestion, since I cannot offer something more specific, is to dig
around and see if there's a pre-defined project that already works. If
you find it, then strip out all of its code files and start from there.

--
Tim Wescott
Control system and signal processing consulting
www.wescottdesign.com