ASCII communication Paradox security

[nouveau depart]

Hi,

I would like to know if i can easyly send and receive ASCII commands
to a paradox security module before i buy the module.
here is a link to the protocol
http://www.elektro-mahl.cz/dokumenty/DIGIPLEX/DIGIPLEX-ASCII-EP00-eng.pdf

look at pag 11.

thank you

[Joep van den Aker]

I think you can use it but you still need an ip to rs232 gateway like
Global Caché.
http://www.icasa-domotica.nl/webshop/beschrijving.php?id=8&path=8

Joep

Op 19 mrt. 2012 om 21:10 heeft nouveau depart
<nouveaud...@gmail.com> het volgende geschreven:

> --
> You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> To post to this group, send email to comman...@googlegroups.com.
> To unsubscribe from this group, send email to commandfusio...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.
>

[nouveau depart]

yes i know I need an IP/rs232 module.
but how to enter this commands in CF?

[Barry Gordon]

Easy is the operative word. You can easily send data to the device using
iViewer. What you need to send is the issue. knowing what has to be sent
will require an in depth understanding of both the iPad (iViewer) side, The
interface device you choose to use to perform TCP to serial conversion, and
what the Paradox module requires. The last item is probably the hardest
part

Hi,

look at pag 11.

thank you

--

[Barry Gordon]

I suggest you go to my web site where there is a Serial/IR demo program.  It uses Javascript to a significant degree which is either a good or a bad thing depending on your familiarity with Javascript. The serial comm examples all uses a Global Cache as does the IR system.

[Joep van den Aker]

First you make a new system in CF with the ip number of the Global
Caché with tcp port 4999.
Second you make commands. For example: ZL001\x0D
To request the zone label 1 as you can read on page 12 below.

Joep

Op 19 mrt. 2012 om 21:44 heeft Barry Gordon <ba...@the-gordons.net>
het volgende geschreven:

[nouveau depart]

Thx Joep this is clear, this is what i tought, really easy.
I was confused because of the ASCII designation ;-)

how do you deal with the code of the alarm system?

[Simon Tuffley]

I offer a programming service if you're interested?

Sent from my iPad