Axis h264 URL

[Heath Volmer]

Trying to get the h264 video from an Axis M7001 to show.  Using rtsp://10.0.0.91/axis-media/media.amp I can see the camera in quicktime on the mac (with 3-seconds of buffering!) but that URL does not work in CF. 

I saw another thread but I didn't see any specifics.

Thanks, Heath

[Jarrod Bell]

iOS does not natively support RTSP encapsulated streams I believe. You need to use a HTTP Live encoded stream.
More details here: http://commandfusion.com/wiki2/software/iviewer/video

Regards,

Jarrod Bell
CommandFusion
www.commandfusion.com

--
You received this message because you are subscribed to the Google Groups "CommandFusion Software" group.
To unsubscribe from this group and stop receiving emails from it, send an email to commandfusio...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

[Eric Miller]

This works for our Axis stuff-- http://192.168.1.200/axis-cgi/mjpg/video.cgi?&camera=1 within the video window.

[Jarrod Bell]

Yes MJPEG feeds are available on most IP Cameras, and will work great in iViewer (make sure to select MJPEG as the stream type in your video window properties).

Regards,

Jarrod Bell
CommandFusion
www.commandfusion.com

--

[Heath Volmer]

Thanks guys. That's what I was using, but hoping I could use the typically-less bandwidth h264 connection.  It won't show in safari either. 

Heath Volmer

Digital Domain Systems

Littleton, CO

Sent from my iTypo 4

[Heath Volmer]

Can anyone tell me what I need to do to this URL to make it work with username and password?

Thanks

[Jarrod Bell]

Try something like:
http://username:pa...@192.168.1.200/axis-cgi/mjpg/video.cgi?&camera=1

Regards,

Jarrod Bell
CommandFusion
www.commandfusion.com

[Heath Volmer]

That seems to do the trick.  Thanks.

[Lucas Christy]

Believe it's http://username:password@192.168.1.200/axis-cgi/mjpg/video.cgi?&camera=1 

Sent from my iPhone

Lucas Christy

Ambiance Systems, Programmer

 

1650 Route 9

Clifton Park, NY  12065

(o) 518-373-0770

(c) 518-859-4639

www.ambiancesystems.com

Powerfully simple......

[Heath Volmer]

Does anyone know if I need to do any special port forwarding to get in to this from the outside?  I've mapped my Axis server's port 80 to WAN 59180 (and tried others) and can only connect to it from the inside.  I have other ports actively passing through to other gadgets so I suspect that maybe the cam server is doing something different.

Thanks, Heath