How to show the status of "Relay Port"

[Hiro]

Hi,

I've know how to show the status of IO's dry contact signal.

(To active the button while PO2 is closed...)

\xF2\x20\xF3RIOXCHA\xF4MM\|P02:D:(\d)

What I would like to do now is, "while CF-Mini's relay is closed, the button assigned is active.)

Possible?

In addition, if I make close the relay , the following feedback shows on System Commander.

(Relay is closed.)

\xF2\x20\xF3RRLYSTA\xF4MM|P01:1|P02:0|P03:0|P04:0\xF5\xF5

(Relay is opend.)

\xF2\x20\xF3RRLYSTA\xF4MM|P01:0|P02:0|P03:0|P04:0\xF5\xF5

What should I enter to the regex of the Feedback Properties?

Regards,

Hiro

**Please include as much software version information as possible. This ensures that other users and CommandFusion staff can provide a helpful answer as quickly as possible.** - Please Delete this line BEFORE posting.

[Jarrod Bell]

Just same as the IO port, but replace P02:D:(\d) with P01:(\d)

Regards,

Jarrod Bell
CommandFusion
www.commandfusion.com

--
You received this message because you are subscribed to the Google Groups "CommandFusion Software" group.
To unsubscribe from this group and stop receiving emails from it, send an email to commandfusio...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

[Hiro]

Jarrod,

Thank you for your prompt reply.
Now I would like to monitor Relay-1 of CF-Mini(ID:20)
As if Relay is closed, D1301 will be active...

I entered the command as attached.. But not working.

Regards,
Hiro

P.S
If I replace "RRLYSTA" to "RIOXCHA" and I closed IO-1 ,D1301 will be active.
So the cabling etc should be correct.

2013年12月23日月曜日 21時26分06秒 UTC+9 Jarrod Bell:

[Jarrod Bell]

As I mentioned in my last message, you need to remove the 'D' part, as this is not part of a relay reply.
\xF2\x20\xF3RRLYSTA\xF4MM|P01:(\d)

Regards,

Jarrod Bell
CommandFusion
www.commandfusion.com

[Hiro]

Hi, Jarrod.

Working with iViewer4 by iPhone5. But not working with iViewer by Android(SONY Xperia)

Android....4.2.2

iViewer4...2013/10/13 ( The latest)

2013年12月24日火曜日 8時06分49秒 UTC+9 Jarrod Bell:

[Jarrod Bell]

Can you try a different Android device and see if it makes a difference?

Regards,

Jarrod Bell
CommandFusion
www.commandfusion.com