Error Connecting to Host - Connection Refused

[Peter McNeely]

I'm having trouble connecting to my CP2E with CF.  I read over different posts so I'm not sure what I'm doing wrong.  I am pretty new to Crestron so I apologize if I'm missing something simple.  I get the cf://..... failed (connection refused) message.  I have the correct IP Address of my control system in the GuiDesigner properties and the same Port in both the Crestron Module and the Gui file.  Any ideas?

[Peter McNeely]

I figured out what my issue was, I had something wrong in my Simpl program.

A couple of other issues I'm noticing.  I have Reload Gui set to On but I seem to have to power off my device and back on to force it to check the server for the updated file.  Also, a bunch of the graphics aren't loading on startup.  The buttons are there and send the proper command, but I can't see the images.

Thank you.

[Jarrod Bell]

What version of guiDesigner? If you are using iOS 4 on an iPhone or
iPod Touch, then you need to force close the app as it will continue
to run in the background.
There is an option in iViewer settings to disable running in the
background for whilst you are developing the GUI and need it to fully
close each time.

Jarrod

On Sep 1, 5:53 am, Peter McNeely <mcneelypet...@gmail.com> wrote:
> I figured out what my issue was, I had something wrong in my Simpl program.
>
> A couple of other issues I'm noticing.  I have Reload Gui set to On but I
> seem to have to power off my device and back on to force it to check the
> server for the updated file.  Also, a bunch of the graphics aren't loading
> on startup.  The buttons are there and send the proper command, but I can't
> see the images.
>
> Thank you.
>

[Jarrod Bell]

Also, check the filenames of the images you are using don't contain
any special characters. Just alphanumeric and underscores (no spaces,
brackets, etc).

Jarrod

On Sep 1, 5:53 am, Peter McNeely <mcneelypet...@gmail.com> wrote:

> I figured out what my issue was, I had something wrong in my Simpl program.
>
> A couple of other issues I'm noticing.  I have Reload Gui set to On but I
> seem to have to power off my device and back on to force it to check the
> server for the updated file.  Also, a bunch of the graphics aren't loading
> on startup.  The buttons are there and send the proper command, but I can't
> see the images.
>
> Thank you.
>

[Peter McNeely]

I'll check the file names later.  I know the button names don't have any spaces etc. but the image file name might.  Also you are correct that I'm running an iPhone 4 for this so I'll disable background running during development.

Thanks.

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to comman...@googlegroups.com.
To unsubscribe from this group, send email to commandfusio...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.