KNX

[Michael]

Hi
Below is a brief description,a project (KNXnet/IP) and the PlugIn (in the zip file) for the connection from the Commandfusion with KNX.
Is KNXnet/IP and KNXnet/IP routing is possible.
Regards Michael

[Bibi]

Many Thanks Michael.

Much appreciated

[Joep van den Aker]

You can also use the interface from AppleKNX. See appleknx.nl

They provide a demoproject for Command Fusion together with the interface.
The interface support up to 10 connections at the same time instead of one with a regular KNX IP interface.

Op 29 dec. 2011 om 12:00 heeft Bibi <giovanni....@gmail.com> het volgende geschreven:

Many Thanks Michael.

Much appreciated

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To view this discussion on the web visit https://groups.google.com/d/msg/commandfusion/-/64IOYf9WWmoJ.
To post to this group, send email to comman...@googlegroups.com.
To unsubscribe from this group, send email to commandfusio...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.

[Koenti]

Works perfect with my Siemens N148/22.  

It took me some time to make it work.  I deleted all systems and recreated it with your plugin (selected KNXnetIP) and start playing with success.

Great job!! 

What after 3/30/2012?

[newpop]

I could control my light with CF on iPad but have long delay time : after press button about >5s. Anyone have experience about this problem??

Thanks, 

[Michael]

Hi
I do not know yet. But probably there is a version for other 3 Montate valid. If you want you can also have an unlimited version. But I have not thought about whether and if so how much it will cost.
Regards Michael

[Michael]

How much is the KNX bus traffic? You can send me your project.
Regards Michael

[Register]

I send to you my project which modified from KNX plugin example GUI.
It work perfect with On command but Off command long time delay. In bus
monitor of ETS I see many (not stable) command OFF sended with only one
time press Off button.
On Sat, 31 Dec 2011 21:33:51 +0700, Michael <wische...@t-online.de>
wrote:

> How much is the KNX bus traffic? You can send me your project.
> Regards Michael
>

--
VS Alec Smarthome

[Michael]

For me the group address 0/0/15 works well. On like Off. The fault
will lie in the KNX system. Can you send me the recording from the bus
monitor?
Regards Michael

On Jan 1, 2:34 am, Register <diachidan...@gmail.com> wrote:
> I send to you my project which modified from KNX plugin example GUI.
> It work perfect with On command but Off command long time delay. In bus
> monitor of ETS I see many (not stable) command OFF sended with only one
> time press Off button.

> On Sat, 31 Dec 2011 21:33:51 +0700, Michael <wischenho...@t-online.de>

> wrote:
>
> > How much is the KNX bus traffic? You can send me your project.
> > Regards Michael
>
> --
> VS Alec Smarthome
>

>  =??Q?=5FKNXnetIP.7z?=
> 158KViewDownload

[Koenti]

hi Michael,

what is the best way to deal with Signed bytes? I want to receive and
send sign bytes values (for my BIQ Shift Temp values).

The received signed values I want to manipulate further eg when
clicking on a button: eg (Prev. Received Signed Value + 1) & send to
KNX.

[Michael]

Hi

Access KNXnet/IP or KNXnet/IPRouting on the bus?

Regrads Michael

[Koenti]

I use KNXnetIP.

Meanwhile I did the following:
1) Via KNX feedback the Signed value I store it in a Global Token
"0_3_16_Byte".
2) When I want to increase/decrease this value via a command, I do it
with the following command \x06\x10\x05\x30\x00\x12\x29\x00\xbc
\xd0\x11\x26\x03\x0f\x02\x00\x80{{(0_3_16_Byte+1):h}}

I think this is the easiest.

Other suggestions?

On Jan 8, 11:08 am, Michael <wischenho...@t-online.de> wrote:
> Hi
>
> Access KNXnet/IP or KNXnet/IPRouting on the bus?
>
> Regrads Michael
>

> On 4 Jan., 23:11,Koenti<koen.reyna...@telenet.be> wrote:
>
>
>
>
>
>
>
> > hi Michael,
>
> > what is the best way to deal with Signed bytes?  I want to receive and
> > send sign bytes values (for my BIQ Shift Temp values).
>
> > The received signed values I want to manipulate further eg when
> > clicking on a button: eg (Prev. Received Signed Value + 1) & send toKNX.
>

[PeterV]

Hello,
did anybodody test a KNX IP Baos gateway from Weinzierl? I have here
one Baos 771 and somehow I am not able to make it work...

[Kine]

Hi

Today I have seen the KNXnet/IP Plugin, but there are at least 2 days to test this. I´m interested to try it. Can you extend the validity of this plugin?

Thanks,

Marco

[Deepak Surana]

Hi,

WE are using Hager Automation System. Can we use Hager KNX-IP router with Command Fusion?

Thanks.

[Michael Hartmann]

--
You received this message because you are subscribed to a topic in the Google Groups "CommandFusion Software" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/commandfusion/K5QZG6X__AI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to commandfusio...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.