crestron simpl+ module

[tech760]

I been having issues to where when I raise volume for let's say a Crestron dmps-300 that sometimes the volume up or down gets stuck and you can't stop it from ramping. Also when you are pushing buttons on the iPad iviewer and the iPad some how disconnects from crestron when it reconnects it will execute all the buttons pushes that you did while it was disconnected. Is there a way to prevent this from happening.

Have you guys had any success with other crestron module that have not had these problems....

[vmailtk5]

Too much data is flowing to the simpl+ module, you can either use 2 Analog Scaler with I/O Limits in series

1st Symbol

InputLowerLimit 0d

InputUpperLimit 65535d

InputLowerLimit 0d

InputUpperLimit 25d

Format 0d

2nd Symbol

InputLowerLimit 0d

InputUpperLimit 25d

InputLowerLimit 0d

InputUpperLimit 65535d

Format 0d

For more steps change 25d to a higher value

Or use crestronmobile JS

On 7 April 2013 01:41, tech760 <asan...@gmail.com> wrote:

I been having issues to where when I raise volume for let's say a Crestron dmps-300 that sometimes the volume up or down gets stuck and you can't stop it from ramping. Also when you are pushing buttons on the iPad iviewer and the iPad some how disconnects from crestron when it reconnects it will execute all the buttons pushes that you did while it was disconnected. Is there a way to prevent this from happening.

Have you guys had any success with other crestron module that have not had these problems....

--
You received this message because you are subscribed to the Google Groups "CommandFusion Software" group.
To unsubscribe from this group and stop receiving emails from it, send an email to commandfusio...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

[tech760]

How do you guys like the crestron mobile js module? Also where do we download this module at.

[vmailtk5]

had a minor issue with russian text on the iPad 3, not been able to test the fix yet but it works fine on the iPad 2. not sure about the link, its on the github thingy

On 7 April 2013 17:12, tech760 <asan...@gmail.com> wrote:

How do you guys like the crestron mobile js module? Also where do we download this module at.

[Jarrod Bell]

http://www.commandfusion.com/wiki2/software/knowledge-base/brand-knowledge-base/crestron

You can download the module from Github after following the links from our wiki.
There is a ZIP button on the github page to download the entire repo (including sample files).
The wiki on the github also has more info directly related to configuring crestronmobile:

https://github.com/CommandFusion/CrestronMobile/wiki

Regards,

Jarrod Bell
CommandFusion
www.commandfusion.com

On 8/04/13 2:12 AM, tech760 wrote: