Comedi: Linux Control and Measurement Device Interface

On 20/06/2025 22:32, A Asraoui wrote: > thank you Ian for checking on this , when do we get the

I've just fixed a nasty kernel memory corruption bug in the `comedi` Linux kernel module built

hi, Trying to install comedi on rhel9 and it is failing due to ssl errros .. is this a known problem

comedilib-0.13.0 is now available for download from the comedi.org web-site, and also from GitHub.

All is working right now on the new LPCIe-7250, I can enable all relays and disable them with success

On 07/05/2025 14:21, Ian Abbott wrote: > Hi, > > On 06/05/2025 15:29, Han Hartgers wrote:

Great, making some progress. Used windows to load the firmware on the battery powered (to the PCB)

Hi, I would like to second this. I have to options in the lab, either use Sensoray 626 or 826.

Hello, I am experimenting with a VERY old (> 20 years) system, AMD Athlon XP 1700+ 32 bit with

On 2023-11-22 11:53, Jayme Firmasyah wrote: > [something irrelevant for the list] I've edited

Thanks a lot! On 2023-08-29 13:28, Ian Abbott wrote: > On 25/08/2023 16:10, 'Anders Blomdell

Hello Ian, Got it, and thank you very much for the debugging help. I'll try it out on a different

Hi All, procedure according to: https://github.com/glasgowneuro/comedi_raspberry_pi_bullseye. works

Symptoms: Code runs correctly on PCI 6229 (using a PCI/PCIe adapter). Outputs a 5V square wave. Swap

Hi Matthijs, could you please tell me which RPI image does work with by pi2 b and usbdux? I have some

Finally found my daqcard700 and related DAQ cables and stuff after moving 6 years ago. Had a minor

On 19/12/2022 15:11, Federico Alfatti wrote: > Hello everybody, > I hope that there is someone

On 15/11/2022 15:33, Bernd Porr wrote: > Hi all, > > I've rewritten pyusbdux now with

Hi, As a follow up, we've struggled, but eventually pinpointed the issue to the PCIe slots of the

Oh yes. It should be subdevice 3. Can you try that? /Bernd bp1@bp1-Precision-WorkStation-T5400:~/nn$

Hi! I'm trying to use an external trig signal to control the acquisition. I would like to start

Hello, I'd like to generate AO waveform triggered by an external pulse generator. Hardware: NI

Hello everybody, it's me again Consider the following system: Debian 10 Ryzen 3600x (SMT disabled

Very well. Thank you very much :) Ian Abbott schrieb am Mittwoch, 16. Februar 2022 um 16:18:05 UTC+1:

Hi Dave, Wow it's been a long time. It doesn't seem like that long ago when I was a student

I had the same problem and came across this thread. I suspected it might be a firmware issue. I can

On Thursday, 28 October 2021 at 11:13:20 UTC+2 Ian Abbott wrote: Hi Andrew, On 27/10/2021 14:06,

Hi, I just saw [1] that comedi is now completely officially in the linux kernels driver, not anymore

Hi all, First of all, thank you for the great work on this driver. We've been running critical

On 07/12/2020 13:08, Ian Abbott wrote: > On 07/12/2020 11:02, 'Robert' via Comedi: Linux