CNC and grounding
3 views
Skip to first unread message
michael culp
May 21, 2012, 10:32:05 AM5/21/12
to coll...@googlegroups.com
I was working on my cnc this weekend and a thought occurred that I should warn you guys about, Make sure your machine and your dust control system are grounded correctly.
When we hooked up a shop vac to our cnc the static caused by it zapped me and fried our controller board. To fix this we ran a grounded wire through the hose from end to end and ensured that the computer and the power supply for the motors & their power supply were all fully grounded.
-michael
When we hooked up a shop vac to our cnc the static caused by it zapped me and fried our controller board. To fix this we ran a grounded wire through the hose from end to end and ensured that the computer and the power supply for the motors & their power supply were all fully grounded.
-michael
Reply all
Reply to author
Forward
0 new messages