Fwd: Links for GS labs test

1,153 views

Skip to first unread message

Abhishek Vanjari

unread,

Sep 14, 2013, 3:03:27 PM9/14/13

to coep_wwc

Please use the following links during the test (i.e.,on 15th Sept 2013) only.

---------- Forwarded message ----------
From: Prof. Sandeep Meshram <plac...@coep.ac.in>
Date: Sat, Sep 14, 2013 at 8:21 PM
Subject: Links for GS labs test
To: coep...@googlegroups.com, amm....@coep.ac.in

Pls share the link tomorrow morning for test. Of G S labs

Thanks n Regards
Prof. Sandeep Meshram
Associate Professor, Training n Placement Officer
College of Engineering Pune.

From: Harshada Khankhoje <hars...@gslab.com>

Date: Sat, 14 Sep 2013 11:58:50 +0530

To: <plac...@coep.ac.in>

Cc: <recru...@gslab.com>

Subject: RE: Database of our stduents For Campus @ COEP 2014 Batch

Hello ,

Test Links for tomorrow –

Link for Batch 1: COEP, Sunday, 15 Sept, 11:15 to 1:15
- http://www2.rsphinx.com/gslab/53b9bff61c59ff8fead8c0247d1b5370c1cef8a9/

Link for Batch 2: COEP, Sunday, 15 Sept, 1:15 to 3:15
- http://www2.rsphinx.com/gslab/71158dd1518c4058048002bedab2b8446f3cc8bb/

In case of any technical issue – you can Call Navin - 9822020096

Please make sure students go through below instructions very carefully -

Instructions:

• This is pre-interview preparation for Software Engineers at GS Lab.

• Your answers for these questions will be used by the interviewer during the interview.

• We expect this activity to take about 1 hour of your time. However, feel free to use more 30 minutes of time if necessary.

• Getting the answers correct is more important than finishing on time.

• You will be asked some multiple-choice questions followed by some subjective/programming questions and the answers will be made available to the interviewer.

• Note: the programming questions are extremely important.

• It is unlikely that you will be called for an interview if you are not able to submit working programs.

• We encourage you to write your program in an IDE of your choice, compile it, run it, ensure that it produces the expected output, and then submit the working program.

• Note: read the instruction for the programming questions very carefully. Most errors are caused because of students not reading the instructions carefully.

• The programming questions are mandatory. You cannot proceed with the test until you have submitted a full, correct, working program for the two programming questions in the test.

• For the programming questions, after submitting a program you have to wait a minute or two for the system to evaluate your program.

• You will not be allowed to proceed with the test until you have written a correct program.

• Do NOT Submit an answer for manual evaluation unless you have read the system generated feedback carefully, and are *sure* that you have written a correct program. Because if your program is found to be wrong, you will not be allowed to proceed with the exam.

• When a program you submitted is found to be incorrect, READ THE FEEDBACK carefully before resubmitting.

• Students who keep re-submitting a program with the same mistakes repeatedly will be penalized.

• If you're writing a C program, make sure it is standard C. Do not use any MicroSoft or TurboC specific code like conio.h, getch, getche, clrscr.

• We encourage you to compile and run your program and then submit the answer , you can use C complier

A note on cheating:

• Do not copy or cheat in any other way.

• The system we are using is extremely good at detecting cheating.

• If two programs are found to be similar (even if not exactly the same), both students will be disqualified, irrespective of who wrote the original program and who copied.

• If answers to the essay questions are directly copy-n-pasted from the internet, you will be disqualified.

Regards,

Harshada

Regards,

Harshada

From: Harshada Khankhoje [mailto:hars...@gslab.com]
Sent: 13 September 2013 16:26
To: 'plac...@coep.ac.in'
Cc: recru...@gslab.com
Subject: RE: Database of our stduents For Campus @ COEP 2014 Batch

Hi,

Please note the schedule :

Pre-placement talk - 10 am to 11am

Members travelling – Mahesh Lalge – Practice Head

Harshada Khankhoje – HR

Online test

Batch 1 – 11:15 – 1: 15 pm ( 120 students )

Batch 2 – 1:15 pm – 3:15 pm ( 120 students )

Here is the URL to be used for the practice tests:-

http://rsphinx.com/practice/C-Language/Function/

http://rsphinx.com/practice/C-Language/FileIO/

Shall share the test link shortly with you all.

Request you to share below details with eligible students :