Access 2010 Installer

0 views

Skip to first unread message

Mica Withington

unread,

Aug 3, 2024, 3:42:30 PM8/3/24

to coacicbackcon

My question is: why do we hav to do add the installer.app every single time we're installing new software or updates? Shouldn't it be saved after the first time giving it access? And if this is a known issue, why isn't the installer.app permanently on the list of apps with Full Disk Access?

You may need to take your computer to a professional in order to help you figure things out. We don't have enough pertinent details and even if we did it still may require being able to see everything first hand and to explore the various system settings.

Again I found the installer.app within Macintosh HD -> System -> Library -> CoreServices, added it to the list of Full Disk Access applications, re-run the installer for Yamaha USB Driver, and it worked.

The problem is that the software you are installing is unfamiliar with modern Mac security practices. You should find a replacement for any app that cannot be installed without Full Disk Access. Such software is very likely to fail at some point in the future. It is better to start searching now, while you can still use the software.

Are you running any anti-virus apps, cleaning/optimizer apps, or third party security software? These types of apps are not needed on a Mac and will interfere with the normal operation of macOS. If you have any of these types of apps installed, then uninstall them by following the developer's instructions.

I've never encountered anything like what you have described here and I do install some third party software from "unidentified developers". Either you have apps I mentioned above, or @etresoft is correct that the apps you are using are just not made for current versions of macOS since an app properly made & distributed should not be having the problems you have described.

I have a Windows form application. It reads data from MS Access Database. I did install MS Access database engine (AccessDatabaseEngine_X64.exe) in my system. It works well. As this application can be used by anyone internally they have to go through the hassle of installing driver before start using the application. To overcome this issue, I created Setup installer for my project using Visual Studio "Setup Project" in VS 2017. I added AccessDatabaseEngine_X64.exe under Custom Actions as prerequisite. It failed to do so because while running installer it launches another installer and pops up an error saying another instance of installer is running. Please close this to continue. How can I embed this in my installer? So that users need not to install Access engine manually to use this application.

Most items like this are installed as prerequisites by a setup.exe that the setup project will build if you do that in the project properties. There are a number of reasons for this, the main one being that you can't install MSI setups from within MSI setups.

You can get around your problem by adding Microsoft Access Database Engine 2010 as prerequisites in Setup project, The following link shows you how to do so, but be careful, if you use VS2017 then the path is different, the path for VS2017 is:

We have encountered this problem as well. We found that deleting the installer, downloading it again from scratch, and running it appears to solve the problem. However, if anyone has insight into how to prevent the initial popup from showing, it would be helpful to know. This forum message seems to touch on it as well ( @eskimo you also are on that thread!). Does anyone know if this was logged as a bug?

You must access the StorageGRID Appliance Installer to verify the installer version and configure the connections between the appliance and the three StorageGRID networks: the Grid Network, the Admin Network (optional), and the Client Network (optional).

To initially access the StorageGRID Appliance Installer, you can use the DHCP-assigned IP address for the Admin Network port on the SG6000-CN controller (assuming the controller is connected to the Admin Network), or you can connect a service laptop directly to the SG6000-CN controller.

The StorageGRID Appliance Installer Home page appears. The information and messages shown when you first access this page depend on how your appliance is currently connected to StorageGRID networks. Error messages might appear that will be resolved in later steps.

To add your application and database files you can try using the approach explained in the Simple Installation Tutorial. The tutorial also explains how to set the product name, company name and product version.

The default location is set to "URL" and you can specify a URL from where the Access run-time installer can be downloaded. If you want to include the run-time in your package, you can change the location to "Use files from disk". You will be notified that the EXE bootstrapper was added to your package. This is required in order to use the prerequisites feature.

You can specify the default installation path in the Application Folder field from the Install Parameters page. This field is formatted and it can use installer properties, including the ones which correspond to predefined folders.

If you need to determine whether a specific Microsoft Office version is installed, you can use the predefined searches from the Search page. The name of a search is actually an installer property which will store the search result.

I'm trying to access .ai files in my dropbox which I had created and then "made offline only". Now when I try to download them and open them I just get "Verifying access to..." and it cycles 50+ times until it gives me a "file read-only" error. These errors pop up in AI.

They are illustrator files.

I've tried downloading the files, loading them locally, copying them, and Dropbox won't let me use open these files any more.

Based on what you described about "offline only" it's safe to assume you're using the desktop app. Could you locate your Dropbox icon, on your menu or task bar, next to your WiFi, hover your mouse over the icon, and clarify the Dropbox version you're using?

Did this post help you? If so, give it a Like below to let us know.
Need help with something else? Ask me a question!
Find Tips & Tricks Discover more ways to use Dropbox here!
Interested in Community Groups? Click here to join!

Oh very interesting thanks @Rich - I've never intentionally used OneDrive, but it's on my computer. I'll make sure it's not trying to auto-sync files.

This is the cardboard box I'm talking about for reference:

A warning message appears at the top of the list: Installing more than one Jump Client as the same user or more than one Jump Client as a service on the same system is being phased out in a future release. In the Representative Console you may use the copy action on a Jump Client to apply different policies to the same endpoint. Click Dismiss to remove the warning message.

The generic installer allows you to create Jump Client and Jumpoint installers that are not tied to a specific Jump Client or Jumpoint. Generic installers can be used for automated or ephemeral deployments on VM images, and do not require authenticating and downloading the Jump Client or Jumpoint-specific installer once deployed.

From the Jump Group dropdown, select whether to pin the Jump Client to your personal list of Jump Items or to a Jump Group shared by other users. Pinning to your personal list of Jump Items means that only you (and higher ranking roles on your team, such as Team Lead and Team Manager if you are a Team Member, and Team Manager if you are a Team Lead) can access this remote computer through this Jump Client. Pinning to a shared Jump Group makes this Jump Client available to all members of that Jump Group.

The installer remains usable only as long as specified by the This Installer is Valid For dropdown. Be sure to leave adequate time for installation. If someone should attempt to run the Jump Client installer after this time, installation fails, and a new Jump Client installer must be created. Additionally, if the installer is run within the allotted time but the Jump Client is unable to connect to the B Series Appliance within that time, the Jump Client uninstalls, and a new installer must be deployed. The validity time can be set for anywhere from 10 minutes to 1 year. This time does NOT affect how long the Jump Client remains active.

Once a Jump Client has been installed, it remains online and active until it is uninstalled from the local system either by a logged-in admin user with appropriate permissions, by a user from the Jump interface, or by an uninstall script. It can also be uninstalled, or extended, from the Jump Client Installer List. A user cannot remove a Jump Client unless the user is given appropriate permissions by their admin from the /login interface.

Select the public portal through which this item should connect for a support session. If a session policy is assigned to this public portal, that policy may affect the permissions allowed in sessions started through this item.

Add Comments, which can be helpful in searching for and identifying remote computers. Note that all Jump Clients deployed via this installer have the same comments set initially, unless you check Allow Override During Installation and use the available parameters to modify the installer for individual installations.