Clusterctrl triple with 3 CM3 lite modules not booting

[capnrob97]

I followed the instructions on how to usbboot from here:

8086 Support - How do I USBBOOT Pi Zeros without SD cards (Cluster HAT/Cluster CTRL)?

When I turn on a CM module with 'clusterctrl on p1', I see a new USB device detected in /var/log/kern.log, but no booting logging in /var/log/daemon.log

I am using the CNAT lite controller image on a pi 400, and this image for the compute modules: https://dist2.8086.net/clusterctrl/usbboot/buster/2020-12-02/2020-12-02-1-ClusterCTRL-armhf-usbboot.tar.xz

Here is what I see in /var/log/kern.log when I turn on one of the compute modules.

Just wondering if I am missing a step or something.

Jun 10 02:02:18 cnat kernel: [ 2888.894644] usb 1-1.1.3: new high-speed USB device number 14 using xhci_hcd

Jun 10 02:02:18 cnat kernel: [ 2889.024925] usb 1-1.1.3: config index 0 descriptor too short (expected 55, got 32)

Jun 10 02:02:18 cnat kernel: [ 2889.025182] usb 1-1.1.3: New USB device found, idVendor=0a5c, idProduct=2764, bcdDevice= 0.00

Jun 10 02:02:18 cnat kernel: [ 2889.025201] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

Jun 10 02:02:18 cnat kernel: [ 2889.025218] usb 1-1.1.3: Product: BCM2710 Boot

Jun 10 02:02:18 cnat kernel: [ 2889.025234] usb 1-1.1.3: Manufacturer: Broadcom

[capnrob97]

I have this resolved, I didn't have my /etc/hosts file configured and now I am able to log into the 3 compute modules (ie: ssh p1)