ClusterCTRL Stack

[Keith Ray]

Hi All

Just purchased a ClusterCTRL Stack and confused on how to assemble. Content lists 20 odd 25 mm legs yet assembled illustration shows 24?

Do not have a 3D printer or know of anyone with one but when I purchased the cluster the Case, Fan Tray and Fans where not available, how do I go about purchasing one when they come available as they seem to be locked to the purchase of the Cluster. Is there another supplier?

regards Keith

[Chris Burton]

Hi, 

Just purchased a ClusterCTRL Stack and confused on how to assemble. Content lists 20 odd 25 mm legs yet assembled illustration shows 24?

I'm sorry about that I must have missed the top 4 when I originally counted them and wrote the text, I've updated it to say 24 and I'll pop the missing 4 in the post for you (and for everyone else who ordered the ClusterCTRL Stack too).

Do not have a 3D printer or know of anyone with one but when I purchased the cluster the Case, Fan Tray and Fans where not available, how do I go about purchasing one when they come available as they seem to be locked to the purchase of the Cluster. Is there another supplier?

 I've submitted a product to Tindie for the cases/frames only and once I have more fans/grills I'll add more options there - you can send me a message on Tindie with what you're after and I'll try and let you know once they're in stock.

Chris.

[Keith]

Hi Chris

 

I would hang on for a minute. My thought are that it should only be 20 off for just the Cluster CTRL Stack but if you are going to fit it in a case you need another 4 off. With no instructions supplied on the assembly of the Stack I used the picture as instructions which mislead me as it shows a Stack as it was removed from the case and the additional 4 off legs fitted.

 

regards Keith Ray

--
You received this message because you are subscribed to the Google Groups "ClusterHAT" group.
To unsubscribe from this group and stop receiving emails from it, send an email to clusterhat+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/clusterhat/b9ff1b3c-ec27-456b-9ff1-04b9994a28dcn%40googlegroups.com.

Virus-free. www.avg.com

[Chris Burton]

Hi, 

I would hang on for a minute. My thought are that it should only be 20 off for just the Cluster CTRL Stack but if you are going to fit it in a case you need another 4 off. With no instructions supplied on the assembly of the Stack I used the picture as instructions which mislead me as it shows a Stack as it was removed from the case and the additional 4 off legs fitted.

 My original plan was to supply all 24x25 mm spacers, as buying 4 spacers would generally be a pain if you wanted to print your own "frame" or similar and it also adds some protection for the components on the board if used otherwise :).

Chris.