IDE issues on i386 box after the patch 009 applied.

[Richmond, Raymond]

Ok, on a pentium box which I installed a new disk into (single master drive
on secondary IDE channel) I get the following errors trying to use it.
these pop up when doing any operation on any partition of this disk. Is the
disk hooped? Controller problems? Suggestions welcome.
(ps. I'll be adding myself to the tech mailing list but please reply to me
as well as list to be sure)

Jan 28 13:54:15 switch /bsd: wd1(pciide0:1:0): lost interrupt
Jan 28 13:54:15 switch /bsd: wd1(pciide0:1:0): lost interrupt
Jan 28 13:54:15 switch /bsd: type: ata
Jan 28 13:54:15 switch /bsd: type: ata
Jan 28 13:54:15 switch /bsd: c_bcount: 1024
Jan 28 13:54:15 switch /bsd: c_bcount: 1024
Jan 28 13:54:15 switch /bsd: c_skip: 0
Jan 28 13:54:15 switch /bsd: c_skip: 0
Jan 28 13:54:15 switch /bsd: pciide0:1:0: device timeout, c_bcount=1024,
c_skip0
Jan 28 13:54:15 switch /bsd: pciide0:1:0: device timeout, c_bcount=1024,
c_skip0
Jan 28 13:54:15 switch /bsd: pciide0:1:0: Bus-Master DMA error: missing
interrupt, status=0x20
Jan 28 13:54:15 switch /bsd: pciide0:1:0: Bus-Master DMA error: missing
interrupt, status=0x20
Jan 28 13:54:15 switch /bsd: wd1a: device timeout reading fsbn 560 of
560-561 (wd1 bn 409808; cn 406 tn 8 sn 56), retrying
Jan 28 13:54:15 switch /bsd: wd1a: device timeout reading fsbn 560 of
560-561 (wd1 bn 409808; cn 406 tn 8 sn 56), retrying
Jan 28 13:54:16 switch /bsd: wd1: soft error (corrected)
Jan 28 13:54:16 switch /bsd: wd1: soft error (corrected)

*********************************************************
**** The relevant DMESG is as follows.
*********************************************************

OpenBSD 2.6 (GENERIC) #0: Thu Jan 27 15:26:06 MST 2000
root@switch:/sys/arch/i386/compile/GENERIC
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 133 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
BIOS mem = 655360 conventional, 66060288 extended
real mem = 66715648
avail mem = 58032128
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(32) BIOS, date 05/12/95
bios0: diskinfo 0xe054600c cksumlen 1 memmap 0xe05460a8 pciinfo 0xe0546118
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82437FX (Triton) PCI/Cache/DRAM" rev
0x01
pcib0 at pci0 dev 7 function 0 "Intel 82371FB (Triton) PCI-ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371FB (Triton) IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 1 lun 0: <TOSHIBA, CD-ROM XM-5702B, 2826> SCSI0 5/cdrom
removable
cd0: can use 32-bit, PIO mode 3, DMA mode 1
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL1280A>
wd0: can use 32-bit, PIO mode 4, DMA mode 2
wd0: 8-sector PIO, LBA, 1222MB, 2484 cyl, 16 head, 63 sec, 2503872 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 0, DMA mode 1 (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 0, DMA mode 1 (using DMA data transfers)
wd1 at pciide0 channel 1 drive 0: <Maxtor 90650U2>
wd1: can use 32-bit, PIO mode 4, DMA mode 2
wd1: 16-sector PIO, LBA, 6199MB, 12595 cyl, 16 head, 63 sec, 12695760
sectors
pciide0: channel 1 interrupting at irq 15
wd1(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
isa0 at pcib0
isadma0 at isa0
ep0 at isa0 port 0x300/16 irq 11: address 00:60:8c:e8:dd:13, utp/aui
(default utp)
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcvt: doreset() - got KEYB_R_RESEND response ... [one time only msg]
pcvt: doreset() - Caution - no PC keyboard detected!
vt0 at isa0 port 0x60/16 irq 1: TVGA 8900CL, 80/132 col, color, 8 scr,
unknown kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask c040 netmask c840 ttymask d8c2
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
WARNING: NVRAM century is 20 but RTC year is 1994
WARNING: clock time much less than file system time
WARNING: using file system time
WARNING: CHECK AND RESET THE DATE!
wd1(pciide0:1:0): lost interrupt
type: ata
c_bcount: 8192
c_skip: 0
pciide0:1:0: device timeout, c_bcount=8192, c_skip0
pciide0:1:0: Bus-Master DMA error: missing interrupt, status=0x20
wd1a: device timeout writing fsbn 64 of 64-79 (wd1 bn 409312; cn 406 tn 1 sn
1), retrying
wd1: soft error (corrected)
wd1(pciide0:1:0): lost interrupt
type: ata
c_bcount: 8192
c_skip: 0
pciide0:1:0: device timeout, c_bcount=8192, c_skip0
pciide0:1:0: Bus-Master DMA error: missing interrupt, status=0x20
wd1a: device timeout reading fsbn 64 of 64-79 (wd1 bn 409312; cn 406 tn 1 sn
1), retrying
wd1: soft error (corrected)
wd1(pciide0:1:0): lost interrupt
type: ata
c_bcount: 1024
c_skip: 0
pciide0:1:0: device timeout, c_bcount=1024, c_skip0
pciide0:1:0: Bus-Master DMA error: missing interrupt, status=0x20
wd1a: device timeout reading fsbn 560 of 560-561 (wd1 bn 409808; cn 406 tn 8
sn 56), retrying
wd1: soft error (corrected)