Fanuc Lubrication Parameter

[Ottavia Delamar]

AFANUC alarm code, also called a FANUC fault or error code, is how a CNC control indicates there is a problem. This error message could indicate issues with either the machine itself, be that electric or mechanical. The FANUC error code might also indicate an issue with the g-code program.

Use the list below to interpret what exactly the fault code is trying to communicate. If you require a replacement part, know that MRO Electric stocks thousands of FANUC CNC replacements. Get your new FANUC servo amplifier or check out our FANUC servo motors. To order a replacement part or a repair job, please call 800-691-8511 or email sa...@mroelectric.com. Curious about other common FANUC CNC problems? Check out our FAQ here.

Hi Running a series 180i-M , the machine halts with no error or alarm. ctrl+F2 or any other function key is impossible. The softkeys in fanuc software work with mouse. The problem resolve after some time but randomly. The rest of the computer functions work fine ( alt+tab, alt+F4, using other applications..)

any idea

I own a machine from Newwai

And after the operation, I discovered the following

When I am inside a program and finished it and I want to go to another program

I do not find that the entry button for another activated program must be filled with the machine in order to do that

And the button dedicated to the barbarism of the bar is an act of an act

I have a Miyano mill with an O-M fanuc controller. I get an overtravel in the +Z error. It appears that the error is when the tool change carousel does not stop in the correct position. There are 2 magnetic limit switches that both have to be illuminated to show the controller that the tool change carousel is in the correct place. Sometimes only one switch is illuminated due to the cam rotating past one of the switches. Why would the tool changer sometimes overtravel in its revolution? The machine will run fine for an hour or so and then the error happens. We put a metal object in front the sensor that is not turned on and then step rotate the tool change carousel. This brings it back into proper alignment and the machine will run.

Any ideas what I need to do?

Thanks in advance for any assistance you can provide.

I have a fanuc control SERIES O-TC TYP AO2B -OO98-B501

machine, Lathe and the machine belongs to the Jolly company

I have a problem that the batteries have expired, and when I opened the machine, it was found that the parameter was not present

When trying to download the parameter, the control panel to run the motors does not activate

I want a way to solve this problem

The amount of positional deviation during stopping exceeded the parameter (No. 1829) setting value. Check parameter 1829. Check for any obstructions along ballscrew (physical bind, packed chip buildup, lubrication, etc.).

3a8082e126