Delta 3d printer

Kevin Schuler

unread,

Apr 28, 2019, 10:57:24 PM4/28/19

to Hive13 Hackerspace

I did not want to have this get burried on the ultimaker discussion. I was going to start building my kossel plus size linear bearing 3d printer. As with all of my printers I never mind brining it down for hive use or projects/ 3d printing days. With that being said is there anyone who is interested in the deltas or want to build it out with me so more hands/ eyes/ brains are on it for when it comes back down for events or makerfaires. Also this model pops up often on bid fta and is EXTREMELY reasonably priced for its specs and being a larger diameter delta. I do not know if it would be a possibility for a model the hive would seek for the fab lab as well?

Ryan Hershey

unread,

May 3, 2019, 7:22:41 AM5/3/19

to cincihac...@googlegroups.com

Kevin -

If you’re open on Thursday evenings, we might consider doing this build as a group project over a couple of 3D Thursdays. I’d certainly be interested.

- Ry

On Sun, Apr 28, 2019, at 10:57 PM, Kevin Schuler wrote:

I did not want to have this get burried on the ultimaker discussion. I was going to start building my kossel plus size linear bearing 3d printer. As with all of my printers I never mind brining it down for hive use or projects/ 3d printing days. With that being said is there anyone who is interested in the deltas or want to build it out with me so more hands/ eyes/ brains are on it for when it comes back down for events or makerfaires. Also this model pops up often on bid fta and is EXTREMELY reasonably priced for its specs and being a larger diameter delta. I do not know if it would be a possibility for a model the hive would seek for the fab lab as well?

--
You received this message because you are subscribed to the Google Groups "Hive13 Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cincihackerspa...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

K Schuler

unread,

May 3, 2019, 5:34:53 PM5/3/19

to Unknown

Lets do it, that is cool with me! I do need to get printing again, my ultimaker has been down. Is that cr10 working decent?

Dave Velzy

unread,

May 7, 2019, 9:59:33 AM5/7/19

to Hive13 Hackerspace

Lorin and I are also going to restart our sidetracked Delta printer project. Anyone interested in participating chime in. Delta's should stick together.

joeypomeroy

unread,

May 7, 2019, 10:27:26 AM5/7/19

to cincihac...@googlegroups.com

I would love to help!! I have access to a sla and pla printer

Thanks

Joe Pomeroy

Sent from my Samsung Galaxy smartphone.

--

You received this message because you are subscribed to the Google Groups "Hive13 Hackerspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cincihackerspa...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/cincihackerspace/54dfc334-5fcd-4f8d-8d18-212927be7c5a%40googlegroups.com.

Dave B.

unread,

May 7, 2019, 11:26:20 AM5/7/19

to cincihac...@googlegroups.com

I'm 3d print useless but electronics handy.

-D

To view this discussion on the web visit https://groups.google.com/d/msgid/cincihackerspace/5cd195cb.1c69fb81.2a166.82c9%40mx.google.com.

Ryan Hershey

unread,

May 7, 2019, 12:36:08 PM5/7/19

to cincihac...@googlegroups.com

The next scheduled 3D Thursday is this week, starting at roughly 6:30 PM. If you’re able to appear, we can wrench on that delta for a few hours.

The CR10 has been a workhorse at .8mm in PETG. I’m having some really strange sidewall ripple in PLA that I haven’t taken the time to figure out. The printer has been down at the hive next to the Ultimaker since the open house, though I think we’re only using it on Thursday this far.

- Ry

Dave Velzy

unread,

May 9, 2019, 4:27:25 PM5/9/19

to Hive13 Hackerspace

I'm not going to make it to 3D Thursday today. Between lingering jetlag and household catch up, I'm whipped.

Still looking to get the Delta project going soon.

Dave

On Tuesday, May 7, 2019 at 12:36:08 PM UTC-4, Ryan wrote:

The next scheduled 3D Thursday is this week, starting at roughly 6:30 PM. If you’re able to appear, we can wrench on that delta for a few hours.

The CR10 has been a workhorse at .8mm in PETG. I’m having some really strange sidewall ripple in PLA that I haven’t taken the time to figure out. The printer has been down at the hive next to the Ultimaker since the open house, though I think we’re only using it on Thursday this far.

- Ry

On Fri, May 3, 2019, at 5:34 PM, K Schuler wrote:

Lets do it, that is cool with me! I do need to get printing again, my ultimaker has been down. Is that cr10 working decent?

On Fri, May 3, 2019, 7:22 AM Ryan Hershey <ry...@ry13.com> wrote:

Kevin -

If you’re open on Thursday evenings, we might consider doing this build as a group project over a couple of 3D Thursdays. I’d certainly be interested.

- Ry

On Sun, Apr 28, 2019, at 10:57 PM, Kevin Schuler wrote:

I did not want to have this get burried on the ultimaker discussion. I was going to start building my kossel plus size linear bearing 3d printer. As with all of my printers I never mind brining it down for hive use or projects/ 3d printing days. With that being said is there anyone who is interested in the deltas or want to build it out with me so more hands/ eyes/ brains are on it for when it comes back down for events or makerfaires. Also this model pops up often on bid fta and is EXTREMELY reasonably priced for its specs and being a larger diameter delta. I do not know if it would be a possibility for a model the hive would seek for the fab lab as well?

--
You received this message because you are subscribed to the Google Groups "Hive13 Hackerspace" group.

To unsubscribe from this group and stop receiving emails from it, send an email to cincihac...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Hive13 Hackerspace" group.

To unsubscribe from this group and stop receiving emails from it, send an email to cincihac...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Hive13 Hackerspace" group.

To unsubscribe from this group and stop receiving emails from it, send an email to cincihac...@googlegroups.com.

K Schuler

unread,

May 10, 2019, 10:18:15 PM5/10/19

to Unknown

Ryan,

Do you think I should look at upgrading the hotend, nozzle, and feeder mech ? I think I bought an aluminum mk7 kit however I cannot remember what box I pit it in.

Hopefully the pla issue can get figured out as to pick one of those printers up in the next bigger size could be a really cheap option to print large volumes

To unsubscribe from this group and stop receiving emails from it, send an email to cincihackerspa...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/cincihackerspace/0afd1c80-2313-47c0-bfba-0ce54aa0dd43%40googlegroups.com.

K Schuler

unread,

May 10, 2019, 10:19:31 PM5/10/19

to Unknown

I will have to use my cr10 or the ultimaker tomorrow during the afternoon to print an xbox controller part in petg

To view this discussion on the web visit https://groups.google.com/d/msgid/cincihackerspace/adc32a2a-6c6f-497f-9b59-a2cb0f051c85%40www.fastmail.com.

Reply all

Reply to author

Forward