EC April Checkin #3

[Ron W]

Only reply near the end of the period to this one.

 

reminders - only 1 reply per team .... keep your replies short .... always include your team number ...

 

1. what did you have done at the start of the period?

2. what do you have done at teh end of the period?

3. what are you doing for your project next meeting?

4. what is missing that you need to complete your project?

 

areas you could comment on:

diagrams,

project board,

calculations and measurements

training your partners for hte test

 

[Ben]

Group 8 (Ben,Gabe,Kevin) 

We didn't reply during the period because we were under the impression there was one check in a day. After completing check in 2 we didn't look at our emails. Hope this isn't a problem. Thank you.

1. At the start of the period we all were familiar with with single and parallel circuits are an we each had individual ideas in our head of how to set up our circuits.

2. By the end of the periods we had finalized our design ideas, drawn a diagram, and gathered the prices we will need. Also, we had a better idea of what measurements will be needed and how to find them. 

3. Next meeting we are going to begin assembling our circuits with the pieces we collected today using our diagram. We will try to begin checking for any possible flaws in our design as well. Furthermore we will begin training each other in measurements so we will be ready for the test.

4. We have all the physical things needed to complete out project,now we need to focus on the non-material things. Knowledge of our system as well as knowledge how to find various measurements is the only thing we are missing. We are in overall good shape for our project.

[Ron W.]

This reply is for our next EC day. Next Monday.

Ron Wright
369-953-9476
Camas Wa

Ben <bkl...@yahoo.com> wrote:

>> TODAY(Beta) • Powered by Yahoo!
>> Firefighter arrested over MMA bouts
>> Raphael Davis faces up to five years in jail for competing in a number of fights.
>> Privacy Policy

[Ron W.]

I wrote this early. It is not due until Monday.

Ron Wright
369-953-9476
Camas Wa

Ron W <127w...@gmail.com> wrote:

[JJ G]

EC11 (Jackson, Meghal, JJ)

 

1. We gathered various materials for our board such as wires, buzzers, lights, etc.

2. We were able to connect wires to a battery and test the buzzers and the lights.

3. We are going to work on our next circuit which will be the parallel.

4. We don't have multiple circuits.

[Maxine Hood]

EC 7

 

1. We had a basic layout in our heads and test systems of our circuit.

2. We have researched other ways to make our circuit and are closer to knowing for sure what our model will be

3. Next meeting we will try out different ways to make our circuit and start building our layout

4. We are missing a good battery for our project.

 

-Maxine, Rachel, and Esther

[Reese Pathak]

EC2

 

1. switches and circuits (all 3)

2. circuits and switches fixed to fit requirements

3. finishing diagram

4. circuit and switches need to be checked that they work individually.

[Sophie Shoemaker]

Team EC 1
1. At the beginning we had a vague sense of how to do the parallel
circuit and knew how to do the series circuit.
2. At the end we had all 3 circuits done and labelled and Lizzy was
working on the drawing.
3. At our next meeting we will do our calculations, finish our drawing
and try to organize the board better.
4. We are not missing anything as far as we know.

[Rio Smith]

EC4

1.)We started off with all the circuits except the series/parallel completed.  

2.)We are now completed with all 3 circuits.

3.)We are going to figure out how to measure all of the voltages, resistances and currents.

4.)We need to make sure that these circuits work under these qualification and we need to make the measurements.

No comments.

On Tue, Apr 10, 2012 at 10:23 AM, Ron W <127w...@gmail.com> wrote:

Only reply near the end of the period to this one.

 

reminders - only 1 reply per team .... keep your replies short .... always include your team number ...

 

1. what did you have done at the start of the period?

2. what do you have done at the end of the period?

[Jennifer Wourms]

EC 5
1.- at the beginning of the period we are figuring out how to cope
with our batteries which are not strong enough to power our fans or
lights. We are building the circuits so we can add the battery later
and still be productive.
2.- at the end of the period we have built the basic structure of the
circuit minus the battery because we don't have one that powers three
volts yet
3.- We will bring new batteries and input them into our circuit. We
will also begin the calculations required for the experiment.
4.- We need bigger and more powerful batteries.

[Jonathan Ho]

EC6

 

1. We had a two batteries and a series circut set. We also had all of our supplies gathered

2. We completed the parallel circut and added a switch to the series circut. The series/parallel circut is almost completed.

3. For our next meeting, we will finish the series/parallel circut and connect all the circuts to the battery.

4. We are missing buzzers with the leads still attached, wires with leads attached, and some tape.

 

--
Jonathan Ho 
 
“Dream as if you'll live forever, live as if you'll die today.” 

[Maxine Hood]

EC 7

 

1. We had our supplies and the start of our diagram

2. We have our circuits almost all built.

3. We are finishing our circuits and testing them more.

4. We need a better battery and another buzzer and the circuits checked.

 

-Maxine, Rachel, Esther

[Max Urbanek]

1. At the start of the period we had almost nothing done, we were just
experimenting.
2. At the end of the period we our series and parallel circuit.
3. Next meeting we are doing our series/parallel circuit
4. The series parallel circuit and all of our calculations.

Group 9 Max, Jeehoon, Austin

On Apr 10, 10:23 am, Ron W <127wri...@gmail.com> wrote:

[arya pathak]

EC#3
1. WE had the remains of our testing (so almost nothing done)
2. WE now have completed our series nd parallel circuit
3. We will be finishing the series parallel circuit
4. We are missing the series parallel circuit

On Apr 10, 10:23 am, Ron W <127wri...@gmail.com> wrote:

[Karina Orasud]

EC10

1. At the start of the period, we had the diagram of how we were going to lay out the circuits planned out.

2. At the end of the period, we finished our series circuit and parallel circuit.

3. For our next meeting, we will work on our parallel/series circuit and labeling the voltage for each of them.

4. We are missing a strong battery.