Hp 1320 Configuration Page

[Giuliana]

Ineed to know how to reset the HP 1320 non network printer so even the page counts go to zero as this is the only way to get envelopes to print again. If anyone can suggest it or another procedure to get the envelope tray to work thanks.

Thanks David. I got the page count to zero but envelopes still won't print. It grabs the envelope like it should but then when I send it from Word 2007 the green light blinks and the roller sounds but after 5-10 seconds the orange light comes on and the roller shuts off. I am able to feed the envelope if I press the green or orange button but unprinted. If you can help, Thanks

Hi, thanks for replying. If I place the 8.5x11 paper in the envelope tray it does the initial grab then I print(from Notepad) and rollers make a sound but the paper does not move then the orange light comes on. I would think it's the pickup roller problem but when I hit either button the paper feeds trough fine but just not printed. I also noted the orange light blinks after it fails to suck in the paper. Then if I hit the green button the paper feed through unprinted and the orange light stays blinking. Then if I hit green button again the page prints from the bottom tray.

I replaced what I thought was the pickup roller about 2000 pages ago, last year. It's gray and the rubber part is not round but oblong. Is there another pickup roller in this printer? After replacing, the main tray feeds fine.

This document provides information on Method 1320, which is designed to simulate the leaching that a waste will undergo from repetitive precipitation of acid rain on an improperly designed sanitary landfill.

This method is an SW-846 Method-Defined Parameter (MDP), meaning that it may not be modified when used for Resource Conservation and Recovery Act (RCRA) testing. For more information, see the Methods Innovation Rule page.

3a8082e126