Dimensions conversion

[AMA]

Hi all
Did any one know how to convert the dimension units from Imperial to
Metric after the plan being created??
I tried to copy/past in a new plan page, its work for the dimension
units but all dimensions scaled down, any Ideas could
help.................... thanks to all

[David Michael Designs]

Double click your dimension icon on the toolbar and then follow the image posted.

--
David Michael Designs - 2D & 3D Design and Drafting

website: http://www.dmd3d.com
email: da...@dmd3d.com

This email communication may contain CONFIDENTIAL INFORMATION WHICH ALSO MAY BE LEGALLY PRIVILEGED and is intended only for the use of the intended recipients identified above. If you are not the intended recipient of this communication, you are hereby notified that any unauthorized review; use, dissemination, distribution, downloading or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by reply email, delete the communication and destroy all copies.

[Adam Robey]

Your email was read to me using Voice on the Go. Try it free for 30 days www.voiceonthego.com/30daysfree

---

From: David Michael Designs
Sent: May 12, 2010 10:29 AM
To: chief...@googlegroups.com
Subject: Re: Dimensions conversion

[AMA]

Thank you every one, but unfortunately this will change only the units
displayed in the plan, but any new entry or item modification stay in
Imperial units

[Andre Tardif]

It should be a simple matter of going into your defaults dialog box
and changing the "Primary Format" to metric "m".

This will change all existing imperial to metric units as well as any
future dimensions. Do you know how to get to the defaults dialog box?
click on the little wrench looking icon on the upper tools bar or you
can double click the dimensions tool and that will get you to the
default dialog for the dimensions.

Andy.