Re: Target 3001 V15 Crack 59
Damiane Burgun
TARGET 3001! is a CAD computer program for EDA and PCB design, developed by Ing.-Bro Friedrich in Germany. It supports the design of electronic schematics, PCBs, and device front panels. It runs under Windows and is available in English, German and French.
The free version (for non-commercial use) is limited to 250 connection pins or pads on two copper layers. The PCB manufacturer PCB-Pool and Conrad Electronic provide a free unlimited version, that generates only printed output or output for PCB-Pool and Conrad's PCB service. Commercial versions with all features are available.
TARGET 3001! collects several features under one user interface (MDI). All project information is stored in one file to avoid redundancy and version conflicts. Design begins with the creation of a schematic diagram and usually ends with the layout of a PCB (or chip).
The schematics can be simulated by the integrated PSPICE compatible mixed mode simulator. Components are stored in a SQLite or MySQL database, also externally accessible. Component data include direct links to datasheets and component supplier information as well as simulation information and 3D models. TARGET's open Component Interchange Format CXF[2] is supported by universal component databases like Ultra Librarian[3] and Footprint Expert.[4]
PCBs or ASICs can be designed manually or using an autoplacer and autorouter. A Specctra interface to external autorouters is available. The design can be automatically checked for spacing violations and many other design rules. If the PCB is ready designed it can be directly displayed and rotated in a live 3D view. The 3D data can be exported in STEP format to produce preview 3D dummies of the PCB on 3D printers. Circuit design on 3D bodies (Molded Interconnect Device, MID) is possible.
CNC data for PCB milling can be obtained in several formats. Additionally a device front panel can directly be derived from the PCB, using the coordinates on the PCB, e.g. from LEDs or potentiometers.
A predecessor of TARGET 3001! was "RULE" (German: Rechner Untersttzter Leiterplatten Entwurf), a DOS-based program for PCB layout (1989). After hobbyists used this, there were calls for a schematic tool and autorouter. In response, TARGET 2.1 (for DOS) was released in 1992. The move to Windows was difficult: early versions of "TARGET V3 for Windows" were prone to crash. The package became stable and more accepted among hobby, educational and professional users.
Developments in versions V7 to V16 included an EMC tool and PSPICE-compatible simulation. The name TARGET was changed to TARGET 2001!, but, as year 2001 approached, "TARGET 3001!" was registered as a trademark and used for versions V9 and higher.
Today, TARGET 3001! is one of the most popular PCB layout systems in Germany and Europe. Readers of electronics magazine Elektor voted it number two.[5] Also testers of the electronics magazine "c't Hardware Hacks" rated it number two.[6]
It seems that there are many users who have difficulty uninstalling programs like TARGET 3001! from their systems. Some experience issues during uninstallation, whereas other encounter problems after the program is removed.
There could be other causes why users may not be able to uninstall TARGET 3001!. An incomplete uninstallation of a program may cause problems, which is why thorough removal of programs is recommended.
This new format allows engineers to download and import the symbol, footprint, and 3D model for the part they need in one click, allowing them to easily create PCB layouts, circuit diagrams, and 3D design rapid prototypes.
German PCB CAD software development programming firm Ing.-Bro Friedrich released TARGET 3001! for professional designers and engineers who prefer a simple yet fully functional CAD tool for circuit design and mix-mode simulation.
To celebrate the 30th anniversary of the founding of the company, version 30 or V30 of the software was released this year. Its improved features include the Pilot Router, interactive meanders, step model optimization, signal classless spacing, and a sidebar with components.
Today, TARGET 3001! users can take advantage of its 3D-STEP models and interactive meandering features. With this design suite, schematic, simulation, PCB, front panel, 3D view are all in one program and in one project file.
This is a start to finish PCB milling with Carvey and Easel software. It includes through hole and surface mount components. 20160717_195825.jpg1200760 218 KBI used FlatCAM to convert my gerber files to gcode. I wrote a small .NET utility (you can download it and use it for your own projects GCodeCleaner.zip (13.6 KB)) to preprocess the FlatCAM output gcode so Easel would accept it. Everything I used was either from Inventables (FR1 material, drill bits, mill bits) or free (FlatCAM, Target3001 schematic capture and pcb layout). No height probing, or customizations were used, this was done with an entirely stock Carvey setup. The project is included as a PDF file with plenty of pictures and screenshots.20160718_103650.jpg1500806 292 KBCarvey PCB Milling Project.pdf (1.0 MB)
If you decide to use the GCodeCleaner utility, just unzip it and put it into the folder containing your FlatCAM gcode files. It is easy to use and the pdf file includes a description.
If the bit has an effective cutting width of CutWidth (0.3mm in your article), and the overlap as a percent of the cutting width is OLapPct, then the amount the tool diameter increases on each successive pass is
Since I read that FR1 material can absorb moisture over time, I have adopted the practice of spraying the board after assembly with a clear Rustoleum spray for protection (after using pieces of painters tape to cover connectors, test points, etc). The picture is my latest board.
@StephenCook
I have made a couple boards with one SOIC on them. Below is an image of a SMT PCB I am about to cut. It has 2- 14pin SOIC, about 20- 1206 size resistors and caps and a few SOTs. It is all SMT except for connectors, switch and LED.
I have made quite a few pcbs up to 4"x5" in size with these techniques. It is handy to be able to make arbitrarily shaped boards using FlatCAM/Easel. I have made trapezoidal and curved pcbs with no problem at all. Hope this is of some help.
If you want to delete the unwanted pcb text in FlatCAM, you need to create the geometry first. The select Edit Geometry in the Edit menu. Now you can select items and delete them. Then you have to select Update Geometry.
After spending many hours of working I have figured that out. Flat cam does have some good features but its missing the ability to select multiple items. But I found another program that is better than Target and does not produce the extra text.
Made this. Soldering would have been better if I switched tips but I moved my stuff and they are MIA at the moment.
ThanksIMG_8635373525 61.9 KB
Welcome to the next generation of PCB library development. The Footprint Expert is the original IPC footprint automation solution, which is also flexible enough for the most advanced user-defined modifications to effortlessly create footprints from component data. It outputs individual parts or entire libraries to all major CAD formats (each available separately). Here is what you get with the CAD output for Target-3001! license:
If you consider tolerance settings, units, line-widths, pad shapes, rotations, and many dozens of other settings (all configurable with the PCB Footprint Expert), you can create over 1,800 variations of ONE SINGLE library! We empower you to quickly build high-quality standard libraries to meet your specific needs.
The Footprint Expert is synchronized to the latest guidelines of the IPC-7352, IPC-7351, and IPC-J-STD-001 (Requirements for Soldered Electrical and Electronic Assemblies). You want your PCB Layout to pass the J-STD-001 standard for solder joint acceptability in the PCB assembly process. You also get the ability to migrate your entire library to future revisions or your own custom-defined requirements as well! Why is this important? Because it ensures that everybody - regardless of experience or language - can build high-quality parts in the same standard, professional way!
Improve your PCB Library skills with solder joint goal knowledge. Take the IPC-J-STD-001 training class ASAP! The PCB designer and EE engineer should have as much information about the PCB assembly process as possible for DFA (Design for Assembly).
Download and install the Evaluation License for the PCB Footprint Expert to see for yourself how it can benefit you! Feel free to contact us or any of our world-wide distributors with questions or to request no-obligation demos!
By default, all quotes issued are for the perpetual USB Key, our most popular configuration. Users who want to go without a USB Key (for example if installing a Network License on a virtual server), have the option of the SL license.
Leased License (Cloud)
Two types of Leased Licenses are available 1) Regular, which may be shared on company site, or by employees working from home within 100 miles / 161 kilometers from company site, and 2) Global, which may be shared with other company users globally. The Lease License is available in monthly and annual increments, with access limited by quantity of MAC addresses purchased. The availability of this license is subject to a number of variables such as internet connectivity, firewall settings, etc.
PCBL may impose other restrictions for users of the Leased License, such as Software upgrade requirements, meaning you will need to upgrade to keep using the Software. Availability of this license is subject to numerous variables related to network/internet connectivity between you and PCBL servers, as well as downtime due to other reasons - such downtime for updates or maintenance. Proxy Servers are not supported.
Single User License (USB Key)
This perpetual license entitles you to install and run the software on one local computer. This solution is ideal for the PCB design contractor or companies with one PCB designer. The Single User is licensed on USB key, and can be easily moved to any computer as needed. Contracting and/or always changing computers? No problem, we make it a snap!!