PNG image files are 2048x1024 (stretched)

79 views
Skip to first unread message

caster

unread,
May 1, 2012, 11:54:35 AM5/1/12
to chemshapes_dev
Hello. Software works great for the most part, thanks! One problem
however is I use the software to create PNG image files to print later
and the images created are all 2048x1024 and I cant seem to change
this resolution. What's worse is by using that resolution it stretches
the width relative to the height making it unusable. If I click
'preview as print' the image is not stretched, only the created images
from the simulation print. Anyone know how to change the res?

Hradec

unread,
May 4, 2012, 2:07:03 AM5/4/12
to chemsha...@googlegroups.com
The resolution is fixed for now. I have it on my list to add resolution configuration: http://code.google.com/p/chemshapes/issues/detail?id=8

-H
blog   home

Milan Augustin

unread,
May 4, 2012, 3:12:04 AM5/4/12
to chemsha...@googlegroups.com
Hello
A temporary solution is to change a batch using Irfanview
(IrfanView B key)
                                     Ago

2012/5/4 Hradec <hra...@hradec.com>

Hradec

unread,
May 4, 2012, 3:39:01 AM5/4/12
to chemsha...@googlegroups.com
If you want a temp solution, you can change this line:
http://code.google.com/p/chemshapes/source/browse/chemshapes/trunk/host/glViewport/context.py?spec=svn796&r=796#308
-H
blog   home

Hradec

unread,
May 4, 2012, 3:41:50 AM5/4/12
to chemsha...@googlegroups.com
forgot to say... to change that line, you have to checkout the source from SVN, change that line in the file trunk/host/glViewport/context.py and run the host in windows or linux.

To run in windows, just run win.cmd.
in linus, just type "make" in a shell!

-H
blog   home

Milan Augustin

unread,
May 4, 2012, 4:11:40 AM5/4/12
to chemsha...@googlegroups.com
When I try to run the program source from SVN does not start sending in Annex
listing. (I have already installed on your computer pyton).

                  thank you Ago



2012/5/4 Hradec <hra...@hradec.com>
log_AgoPC.html

Hradec

unread,
May 4, 2012, 4:25:29 AM5/4/12
to chemsha...@googlegroups.com
what OS? Windows? Linux? OSX?

-H
blog   home

Milan Augustin

unread,
May 4, 2012, 5:04:09 AM5/4/12
to chemsha...@googlegroups.com
Win 7  (32)

2012/5/4 Hradec <hra...@hradec.com>

Hradec

unread,
May 4, 2012, 5:13:25 AM5/4/12
to chemsha...@googlegroups.com
did you used win.cmd to run?

-H
blog   home

aaAug...@gmail.com

unread,
May 4, 2012, 5:24:47 AM5/4/12
to chemsha...@googlegroups.com
yes win.cmd



Dne uživatel Hradec <hra...@hradec.com> napsal:

Milan Augustin

unread,
May 4, 2012, 8:50:14 AM5/4/12
to chemsha...@googlegroups.com
I've tried Win7 on the laptop (64) and also not run.

          Ago

2012/5/4 <aaAug...@gmail.com>

Milan Augustin

unread,
May 7, 2012, 3:23:57 PM5/7/12
to chemsha...@googlegroups.com
Hello
sample printing software CS1, resolution 0.0565 mm print time 1 cm / h
The print quality is gradually improving and is more than enough jewelry needs.

 Ago


RP3d90.JPG
RP3d91.JPG
RP3d92.JPG

Digitalthump

unread,
May 7, 2012, 3:52:08 PM5/7/12
to chemsha...@googlegroups.com
Milan,

Can you tell us more about your setup?  What electronics are you using and what type of vat are you using?  Are you using a tilt or sliding mechanism for build stage release from the vat?  Thanks!  Nice job on the ring!!

Craig

Milan Augustin

unread,
May 7, 2012, 4:11:06 PM5/7/12
to chemsha...@googlegroups.com
3f using a stepper motor (0.9 N) + draiver purchased.
Electronics board with ARM7 processor - 32bit.
Operate the printer's own Python script template (PNG) - CS1.
To release the feed using a stepper motor (up 4mm down
3.9435 mm) some information here: http://3dtisk.blogspot.com/

 Ago

2012/5/7 Digitalthump <digita...@gmail.com>
Reply all
Reply to author
Forward
0 new messages