SkyRC ImaxB6 V2

Martin Grigorov

unread,

Feb 16, 2020, 10:21:06 AM2/16/20

to cheali-charger

Hello,

I was recently looking around for an Imax B6 charger and ordered a clone hoping that it would have the supported Atmega32 and Nuvoton MCUs. Unfortunately, the one I received did not use either of those (it was in one of the unbranded ones, albeit the PCB looked like non of the clone ones I've seen on the internet). Anyway, I returned that one and decided to go for the original one. I saw a few options for places where I can buy it from, such as banggood or aliexpress but I would have to wait quite a significant time to receive the chargers. So I decided to go for an original SkyRC Imax B6 V2, not the AC version, but the DC version instead, which I can by from the UK and don't have to wait 2 months for. The problem now is that I saw it has a STM32 MCU inside. I saw a few people talking here and there about implementing this mcu, but that was a few months ago. I just wanted to check in if anyone has implemented the cheali firmware for the STM32 before I order it. If not, do you know a seller which might sells the clone version with the supported mcus or is it all hit or miss?

Best regards,

Martin

diggit

unread,

Feb 21, 2020, 6:27:51 AM2/21/20

to cheali-charger

Hi,

there is no STM32 support at this moment. If you want cheali supported HW, you'll have to stick with Nuvoton M0517LBN or Microchip ATmega32. I'd be willing to have a look on STM32 support, but for now, I am focusing on my diploma thesis. Do you have reliable STM32 based charger source?

Maybe others can recommend some seller with supported MCU...

Khaphora Rex

unread,

Mar 20, 2020, 10:23:08 PM3/20/20

to cheali-charger

Diggit: are you available for a custom project related to these chargers? Paid of course.

diggit

unread,

Mar 21, 2020, 8:10:31 AM3/21/20

to cheali-charger

Hi,

I am still quite busy working on my diploma thesis. Time is my limited resource for now. What is this project about? There might be existing solution...

Message has been deleted

Nikolaos Nannos

unread,

Jul 20, 2020, 11:49:38 PM7/20/20

to cheali-charger

Hi i have imax b6ac v2 genuine skyrc, after some issues i replaced mcu which is megawin ma84g564ad48, flashed original firmware but it only boots and stays on imax initial logo, it does not enter the menu. Are there any fuses in megawin? The only firmware that i managed to work is turnigy 80 but has wrong measurement in battery meter

Reply all

Reply to author

Forward